AD0-E722 Practice Dumps - Verified By ExamTorrent Updated 52 Questions [Q11-Q34]

AD0-E722 Practice Dumps - Verified By ExamTorrent Updated 52 Questions

Updated AD0-E722 Exam Dumps - PDF Questions and Testing Engine

NEW QUESTION # 11
An external system integrates functionality of a product catalog search using Adobe Commerce GraphQL API.
The Architect creates a new attribute my_attribute in the admin panel with frontend type select-Later, the Architect sees that Productlnterf ace already has the field my_attribute, but returns an Int value. The Architect wants this field to be a new type that contains both option id and label.
To meet this requirement, an Adobe Commerce Architect creates a new module and file etc/schema.graphqls that declares as follows:

After calling command setup:upgrade, the introspection of Productlnterface field my_attribute remains Int.
What prevented the value type of field my_attribute from changing?

• A. The fields of Productlnterface are checked during processing schema.graphqls files. If they have a corresponding attribute, then the backendjype of product attribute is set for field type.
• B. The interface Productlnterface is already declared in Magento.CatalogGraphQI module. Extending requires use of the keyword extend before a new declaration of Productlnterface.
• C. The Magento_CatalogGraphQI module occurs later in sequence than the Magento_GraphQI module and merging output of dynamic attributes schema reader overrides types declared in schema.graphqls

Answer: B

Explanation:
Explanation
According to the Adobe Commerce documentation, to extend an existing GraphQL interface, the keyword extend must be used before the interface name. This indicates that the new declaration is adding or modifying fields to the existing interface, rather than redefining it. If the keyword extend is omitted, the new declaration will be ignored and the original interface will be used. In this case, the Architect wants to change the type of the my_attribute field in the ProductInterface interface, which is already declared in the Magento.CatalogGraphQl module. Therefore, the Architect should use the keyword extend before declaring the ProductInterface interface in the schema.graphqlsfile of the custom module. This will allow the Architect to override the type of the my_attribute field from Int to MyAttributeType.
References:
Extend existing schema | Adobe Commerce Developer Guide
Schema language with GraphQL | Adobe Commerce

NEW QUESTION # 12
While reviewing a newly developed pull request that refactors multiple custom payment methods, the Architect notices multiple classes that depend on \Magento\Framework\Encryption\EncryptorInterface to decrypt credentials for sensitive data. The code that is commonly repeated is as follows:

The Architect needs to recommend an optimal solution to avoid redundant dependency and duplicate code among the methods. Which solution should the Architect recommend?

• A. Replace all Vendor\PaymentModule\Gateway\Config\Config ClaSSeS With virtualType Of Magento\Payiaent\Gateway\Conf ig\Conf ig and Set <user_secret backend_Model="Magento\Config\Model\Config\Backend\Encrypted" /> Under config.xml
• B. Add a plugin after the getvalue method of $scopeConfig, remove the $encryptor from dependency and use it in the plugin to decrypt the value if the config name is user.secret'
• C. Create a common config service class vendor\Pay-ient\Gateway\conf ig\conf ig under Vendor.Payment and use it as a parent class for all of the Vendor\PayimentModule\Gateway\Conf ig\Conf ig ClaSSeS and remove $scopeConf ig and Sencryptor dependencies

Answer: A

Explanation:
Explanation
The Architect should recommend replacing all Vendor\PaymentModule\Gateway\Config\Config Classes with virtualType of Magento\Payment\Gateway\Config\Config and setting <user_secret backend_Model="Magento\Config\Model\Config\Backend\Encrypted" /> under config.xml. This will avoid redundant dependency and duplicate code among the methods. The virtualType of Magento\Payment\Gateway\Config\Config will inherit the functionality of the base class and allow the customization of the constructor arguments, such as the pathPattern and valueHandlerPool. The backend_Model attribute of the user_secret field will specify that the value of this field should be encrypted and decrypted by the Magento\Config\Model\Config\Backend\Encrypted class, which implements the
\Magento\Framework\App\Config\ValueInterface interface and uses the
\Magento\Framework\Encryption\EncryptorInterfaceinternally12. This way, the payment modules do not need to depend on the \Magento\Framework\Encryption\EncryptorInterface or the
\Magento\Framework\App\Config\ScopeConfigInterface directly, and can use the getValue method of the Magento\Payment\Gateway\Config\Config class to get the decrypted value of the user_secret field3.
References:
How to encrypt system configuration fields in Magento 2 - Mageplaza
Magento 2: How to Encrypt/Decrypt System Configuration Fields - Webkul Blog Magento 2: How to create custom payment method - BelVG Blog

NEW QUESTION # 13
An Adobe Commerce Architect designs a data flow that contains a new product type with its own custom pricing logic to meet a merchant requirement. Which three steps are required when adding a product type with custom pricing? (Choose three.)

• A. Content of the etc/product_types.xml file
• B. New price model extending \Magento\Catalog\Model\Product\Type\Price
• C. A new class with custom pricing logic, extending the abstract Product model class
• D. Custom type model extended from the abstract Product Type model
• E. Hydrator for attributes belonging to the new product type
• F. Data patch to register the new product type

Answer: A,B,D

Explanation:
Explanation
To add a product type with custom pricing, the Architect needs to do the following steps:
Create a content of the etc/product_types.xml file that defines the new product type, its label, model, index priority, and price model. This file is used to register the new product type and its associated classes in Magento1.
Create a new price model that extends \Magento\Catalog\Model\Product\Type\Price and implements the custom pricing logic for the new product type. The price model is responsible for calculating the final price of the product based on various factors, such as special price, tier price, catalog price rules, etc2.
Create a custom type model that extends from the abstract Product Type model (\Magento\Catalog\Model\Product\Type\AbstractType) and overrides the methods related to the product type behavior, such as prepareForCart, getAssociatedProducts, etc. The type model defines how the product type interacts with other components, such as quote, order, cart, etc3. References:
How to add a new product type in Magento 2? (MageStackDay mystery question 1) - Magento Stack Exchange Magento 2: How to create custom product types - BelVG Blog Magento 2: How to create custom product types - BelVG Blog

NEW QUESTION # 14
A merchant is using a unified website that supports native Adobe Commerce B2B and B2C with a single store view.
The merchant's objective is to display the B2B account features, such as negotiable quotes and credit limits, in the header of the site on every page for logged-in users who belong to a B2B company account.
Each B2B company possesses its unique shared catalog and customer group, while numerous customer groups for non-B2B customers undergo changes. The merchant insists that this association should not be linked to customer groups.
Which two solutions should the Architect recommend for consideration, taking into account public data and caching? (Choose two.)

• A. Create a new custom condition for customer segments that allow for choosing whether a user is part of a B2B company and then use this segment to modify the output accordingly.
• B. Create a Virtual Type that switches the theme when a user is part of a B2B company so the output can be modified accordingly in the alternate theme.
• C. Set whether the current user is part of a B2B company in the customer session and use that data directly to modify the output accordingly.
• D. Create a new HTTP Context variable to allow for separate public content to be cached for users in B2B companies where the output can be modified accordingly.
• E. Check if the current user is part of a B2B company within a block class and modify the output accordingly.

Answer: A,D

Explanation:
Explanation
Option B is a valid solution because creating a new HTTP Context variable can allow for differentiating the public content cache for users who belong to a B2B company account. The HTTP Context variable can be used to modify the output of the header block accordingly, without affecting the performance or scalability of the site1 Option D is also a valid solution because creating a new custom condition for customer segments can enable targeting users who are part of a B2B company account. The customer segment can be used to modify the output of the header block accordingly, using layout updates or dynamic blocks. This solution can also leverage the existing customer segment functionality and avoid custom coding2 Option A is not a valid solution because switching the theme based on a virtual type can cause performance issues and increase the complexity of the site maintenance. Moreover, switching the theme can affect the entire site appearance, not just the header block3 Option C is not a valid solution because using the customer session data directly to modify the output of the header block can prevent the public content cache from working properly. The customer session data is private and cannot be cached, so this solution can negatively impact the performance and scalability of the site4 Option E is not a valid solution because checking if the current user is part of a B2B company within a block class can also prevent the public content cache from working properly. The block class logic is executed on every request, so this solution can negatively impact the performance and scalability of the site5 References:
1:
https://experienceleague.adobe.com/docs/commerce-cloud-service/user-guide/architecture/starter-architecture.htm
https://experienceleague.adobe.com/docs/commerce-cloud-service/user-guide/marketing/customer-segments.htm
https://experienceleague.adobe.com/docs/commerce-cloud-service/user-guide/design/themes.html?lang=en 4:
https://experienceleague.adobe.com/docs/commerce-cloud-service/user-guide/architecture/starter-architecture.htm
https://experienceleague.adobe.com/docs/commerce-cloud-service/user-guide/architecture/starter-architecture.htm

NEW QUESTION # 15
An Adobe Commerce Architect runs the PHP Mess Detector from the command-line interface using the coding standard provided with Adobe Commerce. The following output appears:

The Architect looks at the class and notices that the constructor has 15 parameters. Five of these parameters are scalars configuring the behavior of MyService. The class also contains three constants referencing one other class.
How should the Architect fix the code so that it complies with the coding standard rule?

• A. Modify the code of MyService so that the number of different classes and interfaces referenced anywhere inside the class is fewer than 13.
• B. Introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of MyService.
• C. Consolidate the constants referencing other classes into a string representation.

Answer: B

Explanation:
Explanation
The issue is being caused by the high coupling between objects (CBO) value of the class MyService. CBO is a metric that measures the number of classes that are coupled to a given class, either by method calls, property or parameter references, inheritance, or constants1. A high CBO value indicates that the class is too tightly coupled with other classes, which makes it more difficult to maintain, test, and reuse2. To reduce the CBO value, the Architect should introduce a new class that encapsulates the five scalar parameters that configure the behavior of MyService. This way, the constructor of MyService will only have one parameter of the new class type, instead of five scalar parameters. This will also make the code more readable and maintainable, as the new class can provide methods to access and manipulate the configuration data. The constants referencing other classes should not be consolidated into a string representation, as this would not reduce the CBO value and would make the code less clear and type-safe3. The number of different classes and interfaces referenced anywhere inside the class is not relevant for the CBO metric, as it only counts the classes that are coupled to the given class1. References: CBO coupling between object, Coupling Between Object classes (CBO), Cohesion and coupling of an object in OO programming

NEW QUESTION # 16
An Adobe Commerce Architect is planning to create a new action that will add gift registry items to the customer's quote. What should the Architect do to guarantee that private content blocks are updated?

• A. Mark the controller by setting no-cache HTTP headers
• B. Invalidate the status of gift registry indexers
• C. Specify a new action in a sections.xml configuration file

Answer: C

Explanation:
Explanation
Private content blocks are sections of the page that are specific to each customer and are not cached by the server. To update these blocks when a customer performs an action, such as adding a gift registry item to the quote, the Adobe Commerce Architect needs to specify the new action in a sections.xml configuration file.
This file defines which blocks need to be updated for each action and how often they should be updated.By doing this, the Architect can ensure that the private content blocks are refreshed with the latest data from the server. References:
Private content | Magento 2 Developer Documentation
Configure private content | Magento 2 Developer Documentation

NEW QUESTION # 17
An Adobe Commerce Architect is investigating a case where some EAV product attributes are no longer updated.
* The catalog is composed of 20.000 products with 100 attributes each.
* The product updates are run by recurring Adobe commerce imports that happen multiple times a day.
* The Architect finds an error in the logs that indicates an integrity constraint while trying to insert row with id
2147483647.
What is causing this error?

• A. EAV attribute import uses REPLACE, which leads to reaching the max limit of the increment of the column
• B. Integrity constraints were dropped after upgrading to the latest version, and the integrity checks were missed.
• C. Magento framework uses INSERT on DUPLICATE, which leads to reaching the max limit of the increment of the column.

Answer: A

Explanation:
Explanation
EAV attribute import uses the REPLACE statement, which deletes and inserts a new row with the same primary key value. This causes the auto-increment column to increase by one for each row, even if the row already exists. If the auto-increment column reaches its maximum value, which is 2147483647 for a signed INT, then any further REPLACE statement will fail with an integrity constraint violation error. References:
EAV and extension attributes | Magento 2 Developer Documentation
GitHub - techdivision/import-attribute: This library provides the functionality for the Magento 2 import of EAV attributes Data integrity in JSON (B) when replacing EAV - Stack Overflow

NEW QUESTION # 18
A client is migrating to Adobe Commerce Cloud and has approximately 800 existing redirects that must be implemented. The number of redirects cannot be reduced because all redirects are specific, and do not match any pattern.
How should the redirects be configured to ensure performance?

• A. Add each redirect as a URL rewrite via the admin Ul.
• B. Add each redirect in the magento/routes.yaml file.
• C. Use VCL snippets to offload the redirect to Fastly.

Answer: C

Explanation:
Explanation
Option B is correct because using VCL snippets to offload the redirect to Fastly is the best way to configure the redirects and ensure performance. VCL snippets are custom code segments that can be added to the Fastly configuration to modify the behavior of the caching service. By using VCL snippets, the redirects can be handled at the edge server level, without reaching the Magento application or the database. This reduces the server load and improves the response time for the redirected requests1.
Option A is incorrect because adding each redirect in the magento/routes.yaml file is not a recommended way to configure the redirects. The magento/routes.yaml file is used to define custom routes for Magento Cloud projects, such as mapping domains or subdomains to environments or services. Adding redirects in this file can cause conflicts with the existing routes and affect the routing logic of the project2.
Option C is incorrect because adding each redirect as a URL rewrite via the admin UI is not an optimal way to configure the redirects. The URL rewrite feature in Magento allows creating custom URLs for products, categories, and CMS pages, and redirecting them to their canonical URLs. However, adding a large number of URL rewrites can increase the database size and affect the performance of the Magento application. Moreover, using the admin UI for this task can be tedious and error-prone3.
References:
1: Custom VCL snippets | Adobe Commerce Developer Guide
2: Configure routes | Adobe Commerce Developer Guide
3: URL Rewrites | Adobe Commerce User Guide

NEW QUESTION # 19
An Adobe Commerce Architect needs to create a new customer segment condition to enable admins to specify an Average sales amount' condition for certain segments.
The Architect develops the custom condition under
Vendor\Module\Model\Segment\Condition\AverageSalesAmount with all of its requirements:

During testing, the following error appears:

What should the Architect do to fix the problem?

• A.
• B.
• C.

Answer: C

Explanation:
Explanation
The error is caused by the missing class declaration for the custom condition class. According to the Adobe Commerce documentation, to create a custom customer segment condition, the class must extend the
\Magento\CustomerSegment\Model\Condition\AbstractCondition class and implement the
\Magento\CustomerSegment\Model\Condition\Combine\Interface interface. The class must also declare its name, label, value type, and attribute code properties. Option B is the only option that correctly declares the class with the required properties and inheritance. Option A and Option C are incorrect because they do not extend the AbstractCondition class or implement the CombineInterface interface, and they do not declare the name, label, value type, or attribute code properties.
References:
Create a customer segment condition | Adobe Commerce Developer Guide
AbstractCondition | Adobe Commerce Developer Guide

NEW QUESTION # 20
An Architect is investigating a deployment issue with a server that is configured to work under the symlink directory /var/www/current, which lead to the latest released version of the application.
The deployment process performs the following steps:

After the last deployment, the merchant reported that the Adobe Commerce Import/Export functionality to export Customer Main File data is not working. The Architect discovered that the export file is not shown in the list of generated files.
Which change to the deployment process should be performed to solve this issue?

• A. Restart the consumer process during deployment to use the directory with a new application version for export files.
• B. Execute Command config:set export/customr/files_directory /var/releases/{release_nunber} toSet the new export path.
• C. Doable Crontab before deployment and re-launch after deployment.

Answer: B

Explanation:
Explanation
The issue is that the export file is not shown in the list of generated files. This is because the export path is not set correctly. The solution is to execute the command config:set export/customr/files_directory
/var/releases/{release_nunber} to set the new export path. This will ensure that the export file is saved in the correct directory and can be accessed from the Admin Panel. References:
https://experienceleague.adobe.com/docs/commerce-cloud-service/user-guide/develop/deploy/staging-production

NEW QUESTION # 21
A merchant notices that product price changes do not update on the storefront.
The index management page in the Adobe Commerce Admin Panel shows the following:
* All indexes are set to 'update by schedule'
* Their status is 'ready'
* There are no items in the backlog
* The indexes were last updated 1 minute ago
A developer verifies that updating and saving product prices adds the relevant product IDs into the catalog_product_price_cl changelog table. Which two steps should the Architect recommend to the developer to resolve this issue? (Choose two.)

• A. Make sure that the version_id for the price indexer in the mview_state table is not higher than the last entry for the same column in the changelog table and re-synchronize.
• B. Invalidate the catalog_Product_price indexer in the Adobe Commerce Admin Panel so that it is fully reindexed next time the cron runs.
• C. Manually reindex the catalog_product_price index from the command line: bin/magento indexer:reindex catalog_product_price.
• D. Make sure that no custom or third-party modules modify the changelog and indexing process.
• E. Reduce the frequency of the cron job to 5 minutes so the items have more time to process.

Answer: A,D

Explanation:
Explanation
The issue here is that the product price changes are not reflected on the storefront, even though the indexes are set to update by schedule and there are no items in the backlog. This indicates that there might be some problem with the changelog and indexing process, which are responsible for tracking and applying the data changes to the index tables. Therefore, the Architect should recommend the developer to check if any custom or third-party modules interfere with the changelog and indexing process, and disable or fix them if needed.
Additionally, the Architect should recommend the developer to verify that the version_id for the price indexer in the mview_state table is consistent with the last entry for the same column in the changelog table, and re-synchronize them if they are out of sync. This will ensure that the indexer can process all the data changes correctly and update the index tables accordingly. References:
https://experienceleague.adobe.com/docs/commerce-admin/systems/tools/index-management.html?lang=en#cron

NEW QUESTION # 22
In a custom module, an Architect wants to define a new xml configuration file. The module should be able to read all the xml configuration files declared in the system, merge them together, and use their values in PHP class.
Which two steps should the Architect make to meet this requirement? (Choose two.)

• A. Create a Data class that implements "\Magento\Framework\Config\Data"
• B. Write a plugin for \Magento\Framework\Config\Data::get() and read the custom xml files
• C. Inject a "reader" dependency for "Magento\Framework\Config\Data" in di.xml
• D. Make a Reader class that implements '\Magento\Framework\Config\Reader\Filesystem"
• E. Append the custom xml file name in "Magento\Config\Model\Config\Structure\Reader" in di.xml

Answer: A,D

Explanation:
Explanation
According to the Adobe Commerce documentation, to create a new xml configuration file, the Architect needs to create a Data class and a Reader class for the custom module. The Data class is responsible for storing and retrieving the configuration data from the cache or the Reader class. The Data class should implement the
"\Magento\Framework\Config\Data" interface or extend the "\Magento\Framework\Config\Data" class. The Reader class is responsible for reading and validating the xml configuration files from the file system. The Reader class should implement the '\Magento\Framework\Config\Reader\Filesystem" interface or extend the
'\Magento\Framework\Config\Reader\Filesystem" class. The Architect also needs to declare the Data class and the Reader class in the di.xml file of the custom module, and specify the name of the xml configuration file, the converter class, and the schema locator class for the Reader class.
References:
Configuration types | Adobe Commerce - Experience League
Create configuration types | Adobe Commerce - Experience League

NEW QUESTION # 23
The development of an Adobe Commerce website is complete. The website is ready to be rolled out on the production environment.
An Architect designed the system to run in a distributed architecture made up of multiple backend webservers that process requests behind a Load Balancer.
After deploying the system and accessing the website for the first time, users cannot access the Customer Dashboard after logging in. The website keeps redirecting users to the sign-in page even though the users have successfully logged in The Architect determines that the session is not being saved properly.
In the "app/etc/env.php", the session is configured as follows:

What should the Architect do to correct this issue?

• A. Utilize the Remote Storage module to synchronize sessions between the servers
• B. increase the session size with the command config:set system/security/max_session_size_admin
• C. Update the session host value to a shared Redis instance

Answer: C

Explanation:
Explanation
Option A is correct because updating the session host value to a shared Redis instance in the
"app/etc/env.php" file will allow the session to be saved properly and prevent users from being redirected to the sign-in page after logging in. Redis is a fast and reliable in-memory data store that can be used for session storage in Magento 2. By using a shared Redis instance, the session data can be accessed by any of the backend web servers behind the load balancer, regardless of which server handled the initial request. This ensures that the user's session is maintained and consistent across different servers1.
Option B is incorrect because increasing the session size with the command config:set system/security/max_session_size_admin will not solve the issue of session not being saved properly.
This command only affects the admin session size limit, not the customer session size limit. Moreover, this command does not address the root causeof the issue, which is that the session data is not shared among the backend web servers2.
Option C is incorrect because utilizing the Remote Storage module to synchronize sessions between the servers is not a viable solution for this issue. The Remote Storage module is a feature of Magento Commerce Cloud that allows storing media files and other static content on a remote storage service such as AWS S3 or Azure Blob Storage. This module does not support synchronizing sessions between servers, as sessions are dynamic and transient data that need to be stored in a fast and accessible data store such as Redis3.
References:
1: Use Redis for session storage | Adobe Commerce Developer Guide
2: Security | Adobe Commerce User Guide
3: Remote storage | Adobe Commerce Developer Guide

NEW QUESTION # 24
An Adobe Commerce Architect notices that queue consumers close TCP connections too often on Adobe Commerce Cloud server leading to delays in processing messages.
The Architect needs to make sure that consumers do not terminate after processing available messages in the queue when CRON job is running these consumers.
How should the Architect meet this requirement?

• A. Set cohsumers_wait_for_max_MESSAGES variable true in deployment stage.
• B. Change max_messages from 10,000 to 1,000 for CRON_CONSUMERS_RUNNER variable.
• C. Increase multiple_process limit to spawn more processes for each consumer

Answer: A

Explanation:
Explanation
Option A is correct because setting the consumers_wait_for_max_messages variable true in the deployment stage is the best way to meet the requirement. This variablecontrols whether the queue consumers should wait for a maximum number of messages to process before terminating. If this variable is set to true, the consumers will not terminate after processing the available messages in the queue, but will wait until they reach the max_messages limit or the cron job timeout. This way, the consumers can keep the TCP connections open and avoid delays in processing messages1.
Option B is incorrect because increasing the multiple_process limit to spawn more processes for each consumer will not solve the issue of queue consumers closing TCP connections too often. The multiple_process limit determines how many parallel processes can be run for each consumer.
Increasing this limit may improve the throughput of message processing, but it will also consume more server resources and may cause conflicts or errors. Moreover, it will not prevent the consumers from terminating after processing the available messages in the queue2.
Option C is incorrect because changing the max_messages from 10,000 to 1,000 for CRON_CONSUMERS_RUNNER variable will worsen the issue of queue consumers closing TCP connections too often. The max_messages variable defines how many messages each consumer should process before terminating. Decreasing this variable will make the consumers terminate more frequently, which will result in more TCP connections being closed and reopened. This will increase the delays in processing messages3.
References:
1: Configure message queues | Adobe Commerce Developer Guide
2: Configure message queues | Adobe Commerce Developer Guide
3: Configure message queues | Adobe Commerce Developer Guide

NEW QUESTION # 25
A third-party company needs to create an application that will integrate the Adobe Commerce system to get orders data for reporting. The integration needs access to the GET /Vl/orders endpoint. It will call this endpoint automatically every hour around the clock. The merchant wants the ability to restrict or extend access to resources as well as to revoke the access using Admin Panel.
Which type of authentication available in Adobe Commerce should be used and implemented in a third-party system for this integration?

• A. Use token-based authentication to obtain the Admin Token. The third-party system will utilize the REST endpoint using the admin username and password to get the Admin Token, which will be used as the Bearer Token to authorize.
• B. Use OAuth-based authentication to provide access to system resources. Integration will be registered by the merchant in the admin panel with an OAuth handshake during activation. The third-party system should follow OAuth protocol to authorize.
• C. Use token-based authentication to obtain an integration Token, integration will be created and activated in the admin panel using default integration token settings to get access to the token, which will be used as the Bearer Token to authorize.

Answer: B

Explanation:
Explanation
According to the Adobe Commerce documentation, OAuth-based authentication is the recommended method for integrations that need access to system resources, such as orders, customers, products, etc. OAuth-based authentication allows the merchant to control the access level and scope of the integration, as well as to revoke the access at any time using the admin panel. OAuth-based authentication also requires an OAuth handshake between the integration and the Adobe Commerce system during activation, which ensures a secure exchange of tokens and keys. The third-party system should follow the OAuth protocol to obtain and refresh the access token, which will be used as the Bearer Token to authorize the REST API calls.
References:
Authentication | Adobe Commerce Developer Guide
OAuth-based authentication | Adobe Commerce Developer Guide

NEW QUESTION # 26
An Architect needs to integrate an Adobe Commerce store with a new Shipping Carrier. Cart data is sent to the Shipping Carrier's API to retrieve the price and display to the customer. After the feature isimplemented on the store, the API hits its quota and returns the error "Too many requests". The Shipping Carrier warns the store about sending too many requests with the same content to the API.
In the carrier model, what should the Architect change to fix the problem?

• A. ln_doShipmentRequest()f call canCollectRates() before sending request to the API.
• B. Implement _setCachedQuotes() and _getCachedQuotes(), return the data if the request matches.
• C. Override getResponse, save the response to a variable, check if the response exists, then return.

Answer: B

Explanation:
Explanation
The carrier model class can implement caching methods to store and retrieve the quotes from the API based on the request parameters. This can reduce the number of API calls and improve the performance of the shipping rate calculation. The _setCachedQuotes() method can save the response from the API to a cache storage, and the _getCachedQuotes() method can check if there is a cached response for the current request and return it if it exists. References: Caching in carrier model, Carrier model interface

NEW QUESTION # 27
An Adobe Commerce Architect is asked by a merchant using B2B features to help with a configuration issue.
The Architect creates a test Company Account and wants to create Approval Rules for orders. The Approval Rules tab does not appear in the Company section in the Customer Account Menu when the Architect logs in using the Company Administrator account.
Which two steps must be taken to fix this issue? (Choose two.)

• A. Set 'Enable B2B Quote' in the B2B Admin to TRUE
• B. Make sure that the 'Purchase Order' payment method is active
• C. Merchant needs to log out of frontend and then log back in to load new permissions
• D. Set 'Enable Purchase Orders' in the B2B Admin to TRUE
• E. Set 'Enable Purchase Orders' on the Company Record to TRUE

Answer: B,D

Explanation:
Explanation
The issue here is that the Approval Rules tab does not appear in the Company section in the Customer Account Menu when the Architect logs in using the Company Administrator account. This is because the Approval Rules feature requires two settings to be enabled: the Purchase Orders feature and the Purchase Order payment method. The solution is to set 'Enable Purchase Orders' in the B2B Admin to TRUE and make sure that the
'Purchase Order' payment method is active. This will allow the Architect to create and manage Approval Rules for orders.
References:
https://experienceleague.adobe.com/docs/commerce-admin/b2b/purchase-orders/account-dashboard-approval-rul

NEW QUESTION # 28
An Architect is investigating a merchant's Adobe Commerce production environment where all customer session data is randomly being lost. Customer session data has been configured to be persisted using Redis, as are all caches (except full page cache, which is handled via Varnish).
After an initial review, the Architect is able to replicate the loss of customer session data by flushing the Magento cache storage, either via the Adobe Commerce Admin Panel or running bin/magento cache: flush on the command line. Refreshing all the caches in the Adobe Commerce Admin Panel or running bin/magento cache: clean on the command line does not cause session data to be lost.
What should be the next step?

• A. Set the Stores > Configuration' option for Store Session Data Separately' to 'Yes' in the Adobe Commerce Admin Panel.
• B. Educate the merchant to not flush cache storage and only refresh the caches in future.
• C. Check app/etc/env.php and make sure that the Redis configuration for caches and session data use different database numbers.

Answer: C

Explanation:
Explanation
The issue here is that the customer session data is randomly being lost when flushing the Magento cache storage. This is because the Redis configuration for caches and session data might be using the same database number, which causes the session data to be deleted along with the caches. The solution is to check the app/etc/env.php file and make sure that the Redis configuration for caches and session data use different database numbers. This will prevent the session data from being affected by the cache operations. References:
https://experienceleague.adobe.com/docs/commerce-cloud-service/user-guide/develop/deploy/redis.html?lang=e

NEW QUESTION # 29
An Adobe Commerce Architect designs and implements functionality that introduces a new Complex Product Type to the existing Adobe Commerce website. Besides visual demonstration of the new product type, the changes include adjustments to the price index.
The website utilizes a multi-dimensional indexer feature to store the price index. The Architect decides to cover it with integration tests. After creating and running one test, the Architect discovers that database storage is not being fully cleaned.
The test method has the following annotation declaration:

Which adjustment should the Architect make to fix this issue?

• A. Add annotation @magentoApplsolation enabled to method PHPDoc
• B. Create Customer_ProductType: :Test/_files/{fixture_name)_rollback.php for every fixture
• C. Modify method PHPDoc and change annotation @magentoDbIsolation to enabled

Answer: C

Explanation:
Explanation
The issue here is that the database storage is not being fully cleaned after the test is run. The solution is to modify the method PHPDoc and change the annotation @magentoDbIsolation to enabled. This will ensure that the database storage is fully cleaned after the test is run. References:
https://developer.adobe.com/commerce/testing/guide/integration/#database-isolation1

NEW QUESTION # 30
A representative of a small business needs an Adobe Commerce Architect to design a custom integration of a third-party payment solution. They want to reduce the list of controls identified in their Self-Assessment Questionnaire as much as possible to achieve PCI compliance for their existing Magento application.
Which approach meets the business needs?

• A. Utilize the payment provider iframe system to isolate content of the embedded frame from the parent web page.
• B. Utilize a trusted signed certificate issued by a Certification Authority (CA) to secure each connection made by the payment solution protocol via https.
• C. Utilize the Advanced Encryption standard (aes-256) algorithm to encrypt all customer-sensitive data from the payment module.

Answer: A

Explanation:
Explanation
Using an iframe system for payment integration can help reduce the PCI scope and compliance burden for the merchant, as the payment data is collected and processed by the payment service provider (PSP) within the iframe, without touching the merchant's website or server. This way, the merchant can leverage the PSP's PCI certification and avoid storing or transmitting any sensitive cardholder data on their own system. The iframe also provides a secure barrier between the host webpage and the loaded page, preventing any access or manipulation of the payment data by malicious actors. To implement this approach, the merchant needs to embed the PSP's payment form in their checkout page using an iframe element, and configure the communication between the iframe and the host page using JavaScript123.

NEW QUESTION # 31
An Adobe Commerce Architect needs to log the result of a ServiceClass:: getData method execution after all plugins have executed. The method is public, and there are a few plugins declared for this method. Among those plugins are after and around types, and all have sortOrder specified.
Which solution should be used to meet this requirement?

• A. Declare a new plugin with the sortOrder value lower than the lowest declared plugin sortOrder and implement aroundGetData method.
• B. Declare a new plugin with the sortOrder value higher than the highest declared plugin sortOrder and implement aroundGetData method.
• C. Declare a new plugin with the sortOrder value higher than the highest declared plugin sortOrder and implement afterGetData method.

Answer: C

Explanation:
Explanation
This solution ensures that the new plugin will execute after all the existing plugins for the ServiceClass::getData method, and will be able to log the final result of the method execution. The afterGetData method of the new plugin will receive the result of the method as a parameter, and can use any logging mechanism to record it. The sortOrder value of the new plugin should be higher than the highest declared plugin sortOrder, so that it will run last in the sequence of plugins. The after type of plugin is preferred over the around type of plugin, because it is simpler and more efficient, and does not require calling the proceed() method.
References:
Plugins (Interceptors) | Adobe Commerce Developer Guide
Plugin best practices | Adobe Commerce Developer Guide

NEW QUESTION # 32
......

New (2024) Adobe AD0-E722 Exam Dumps: https://www.examtorrent.com/AD0-E722-valid-vce-dumps.html

Best Way To Study For Adobe AD0-E722 Exam Brilliant AD0-E722 Exam Questions PDF: https://drive.google.com/open?id=1o0P3vRSaWhNZZTO2JJ3GX9F7cashhZ-3