Practice SAP Certified Technology Specialist E_S4HCON2020 exam. Online Exam Practice Tests with detailed explanations! Pass E_S4HCON2020 with confidence!
E_S4HCON2020 - SAP Certified Technology Specialist - SAP S/4HANA Conversion and SAP System Upgrade Practice Tests 2021 | ExamTorrent
NEW QUESTION 20
You want to perform custom code check via ABAP test cockpit in preparation of your SAP S/4HANA conversion? What kind of SAP System can you use to generate the custom code migration worklist?
- A. An SAP S4HANA 1709 sandbox system
- B. A Standalone SAP system with ABAP 7.51 or above
- C. AA
Answer: A,B
NEW QUESTION 21
What do you need to consider when performing the SI checks for an SAP S/4HANA conversion? There are 2 correct answers to this question.
- A. The SI checks are executed in the development system and the results are transported into the subsequent systems.
- B. Depending on the SAP S/4HANA version, there are different SI check frameworks.
- C. You need to build up a SI check framework by applying SAP notes.
- D. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.
Answer: B,C
NEW QUESTION 22
You are executing a standard SUM procedure to update an SAP system using main configuration mode "Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. Early in the downtime
- B. At the end of the downtime
- C. Before the downtime starts
- D. As part of the cleanup process
Answer: C
NEW QUESTION 23
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
- B. In the job log for the corresponding job in SM37 (Job Overview)
- C. In the corresponding R3trans log files of this phase
- D. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
Answer: A,B
NEW QUESTION 24
Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above?
There are 3 correct answers to this question.
Response:
- A. Dual Stack split
- B. Homogenous system copy
- C. Database migration
- D. Release upgrade
- E. Support Package Stack update
Answer: C,D,E
NEW QUESTION 25
SUM was registered at the SAP Host Agent. Based on which information does the SAP Host agent determine the path to the SUM directory?
- A. The path was stored in file sumabap.conf during registration
- B. AA
Answer: A
NEW QUESTION 26
During a SUM run you vivant to check if the phase SHADOW_IMPORT_INC is still running properly. Where can you find information about this?
There are 2 correct answers to this question.
Response:
- A. Check for running R31oad processes on the host of the primary application server
- B. Check for running R3trans processes on the host of the primary application server
- C. Check for the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- D. Check for running batch jobs in the shadow system via Job Overview (SM37)
Answer: B,C
NEW QUESTION 27
What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:
- A. To repeat specific phases during the SUM run
- B. To make the progress information within SUM UI more accurate
- C. To skip selected phases during the SUM run
- D. To auto-fill specific fields on selected screens on the SUM UI
Answer: B
NEW QUESTION 28
You are executing a standard SUM procedure to update an SAP system using main configuration mode
"Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. Early in the downtime
- B. At the end of the downtime
- C. Before the downtime starts
- D. As part of the cleanup process
Answer: C
NEW QUESTION 29
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the database migration option (DMO) for SUM
- B. Using the main configuration option "Standard" when applying SAP Support Packages
- C. Using the main configuration option "Single System" in case of an upgrade
- D. Using the main configuration option "Single System" when installing an Add-On
Answer: D
NEW QUESTION 30
In ICNV. How database operations synchronized between the source and the target table?
- A. Deletes are directly executed in the target table by delete trigger.
- B. AA
Answer: A
NEW QUESTION 31
Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:
- A. Install add-on SAP Gateway 7.50
- B. Uninstall Fiori apps not released for SAP_UI 7.50
- C. Uninstall industry extensions not supported by SAP S/4HANA
- D. Delete client 066 (Early Watch Client)
Answer: B,D
NEW QUESTION 32
What phases of SUM will be executed during an SAP S/4HANA conversion including DMO?
There are 3 correct answers to this question.
Response:
- A. Phase RUN_RSDBSCPY
- B. Phases DIFF*
- C. Phase DOWNCONF_DTTRANS
- D. Phase RUN_RSPTBFIL _ISUTABU
- E. Phases EU_IMPORT*
Answer: B,C,E
NEW QUESTION 33
How does SUM recognize modification adjustment transports from predecessor systems?
Please choose the correct answer.
- A. By searching for transport requests named <SID>K0<number>
- B. By searching for transport requests that are assigned to the project SAP_ADJUST
- C. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- D. By searching for transport requests in the file umodauto.Ist
Answer: D
NEW QUESTION 34
Which Guides contain information about SUM phases starting with "EU_CLONE_"?
There are 2 correct answers to this question.
Response:
- A. The major SUM Guide
- B. The SAP S/HANA Conversion Guide
- C. The DMO Guide
- D. The Application Guide
Answer: B,C
NEW QUESTION 35
You want to execute a Unicode Conversion only. Which approach do you need to follow?
Please choose the correct answer.
Response:
- A. SUM without DMO
- B. SWPM using the Load procedure
- C. SWPM using the Backup / Restore procedure
- D. SUM with DMO
Answer: B
NEW QUESTION 36
You are upgrading a three-system landscape DEV - QAS - PRD. The upgrade project contains a Unicode conversion. You have already upgraded the DEV and the QAS system but not yet the PRD system.
What do you need to consider?
Please choose the correct answer.
Response:
- A. The transport between Unicode and non-Unicode systems is forbidden.
- B. The upgrade of the PRD must be finished before you import any transports from the upgraded DEV system into the PRD.
- C. The upgrade of the PRD must be finished before you start new development in the DEV.
- D. The transport domain of systems DEV and QAS must differ from the transport domain of system PRD.
Answer: B
NEW QUESTION 37
You are planning to use DMO of SUM to perform an "inplace-migration" to SAP HANA. What do you need to consider? Note: there are 2 correct answers to this question.
- A. The target database size increases temporarily because of the Shadow Repository.
- B. SAP HANA Landscape Reorganization required a manual step to edit a file.
- C. Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.
- D. Network capacity between exporting and importing R3load processes must be.
- E. The source system is non-Unicode and the target database is a scale-out system.
Answer: B,C
NEW QUESTION 38
ICNV initialization does 3
- A. Build index on flag column
- B. Creation of views
- C. AA
- D. Creation of flag
Answer: A,B,D
NEW QUESTION 39
You have chosen the "Advanced" option during the main configuration of the SUM tool. Which steps take place via the shadow instance?
There are 2 correct answers to this question.
Response:
- A. Activation of dictionary objects (ACT_UPG)
- B. Switch to new repository (EU_SWITCH)
- C. Conversion of application tables (PARCONV_UPG)
- D. Modification adjustment (SPDD)
Answer: A,D
NEW QUESTION 40
You want to use the downtime-optimized data conversion for your SAP S/4HANA conversion. What is the main difference from a standard SAP S/4HANA conversion?
Please choose the correct answer.
Response:
- A. The repository is migrated in uptime
- B. Dedicated application tables are migrated in uptime
- C. TABIMJJPG is executed in uptime
- D. An additional temporary database is used during uptime
Answer: B
NEW QUESTION 41
......
The best E_S4HCON2020 exam study material and preparation tool is here: https://www.examtorrent.com/E_S4HCON2020-valid-vce-dumps.html
