[Dec-2024] Pass Juniper JN0-252 Exam in First Attempt Guaranteed!
Full JN0-252 Practice Test and 88 unique questions with explanations waiting just for you, get it now!
NEW QUESTION # 18
Which step must you take when configuring rogue AP detection?
- A. Set the proximity zones.
- B. Disable honeypot detection.
- C. Enable rogue AP detection.
- D. Set the Radio Resource Management (RRM) interval.
Answer: C
Explanation:
Rogue AP Detection:
Rogue AP detection is crucial for maintaining network security by identifying unauthorized access points.
Configuration Step:
Enable Rogue AP Detection:
The first and necessary step in configuring rogue AP detection is enabling the feature in the Mist system.
Other Steps:
Setting proximity zones, disabling honeypot detection, and setting the RRM interval are additional configurations but not the initial or mandatory step.
Conclusion:
The correct answer is A.
Reference:
Mist Documentation on Rogue AP Detection: Mist Documentation
NEW QUESTION # 19
You are inviting a new administrator into a Mist organization. In this scenario, which two roles are valid? (Choose two.)
- A. Advanced
- B. Custom
- C. Installer
- D. Observer
Answer: C,D
NEW QUESTION # 20
Users are complaining about WLAN performance and the Mist dashboard reports non-Wi-Fi interference.
Which diagnostics tool would you use to further investigate this issue on-site and determine the location of the interference?
- A. spectrum analyzer
- B. wireless design software
- C. WLAN scanner
- D. protocol analyzer
Answer: A
Explanation:
Reference: https://www.mist.com/resources/ap43-access-point/
NEW QUESTION # 21
The Mist UI, which part of the system platform provides Information about missing VLANs?
- A. Marvis Actions
- B. Switch Insights
- C. Service-Level Exceptions
- D. Events
Answer: A
Explanation:
System Platform Components in Mist UI:
Different components provide various insights and information about the network.
Component Descriptions:
Switch Insights: Provides detailed information about switch performance and status.
Events: Logs and displays events occurring in the network but does not specifically highlight missing VLANs.
Marvis Actions: AI-driven insights and recommendations that include identifying and suggesting actions for missing VLANs.
Service-Level Exceptions (SLEs): Monitor and report on performance metrics, not specifically focused on VLAN issues.
Conclusion:
The correct answer is C (Marvis Actions).
Reference:
Mist Documentation on System Platform Components: Mist Documentation
NEW QUESTION # 22
Mist has detected a bad cable.
What are two ways that Marvis determined this result? (Choose two.)
- A. It identified a missing VLAN.
- B. It identified port flapping.
- C. It identified interface errors.
- D. It identified network loops.
Answer: B,C
NEW QUESTION # 23
..has reported a network outage. After locating the user, you find that the switch interface facing the user Is down but there Is no alert in the Mist Ul. You want to ensure that in the future, you receive an alert when a switch *face is down. You have already verified that the Critical Switch Port Down alarm is configured and enabled on the Alerts Configuration page.
his scenario, which action in the Mist Ul will satisfy the requirement?
- A. Enable the Critical Switch Port Up alarm on the Alerts Configuration page.
- B. Disable the Critical Switch Pott Down alarm on the Alerts Configuration page.
- C. Navigate to the switch in the Mist Ul and modify the Port Profile configuration to enable Persistent (Sticky) MAC Learning for the Port Profile.
- D. Navigate to the switch in the Mist Ul and modify the Port Configuration to enable the Up/Down Port Alerts setting for the interface.
Answer: D
Explanation:
* To ensure that you receive alerts when a switch interface goes down, you need to enable the Up/Down Port Alerts setting for the specific interface.
* This setting can be configured by navigating to the switch within the Mist UI and modifying the port configuration. Enabling this setting ensures that any changes in the port status, such as going down, will trigger an alert.
* This is critical for proactive network monitoring and to promptly address any connectivity issues.
* Reference: Juniper Networks documentation on configuring port alerts within the Mist UI.
NEW QUESTION # 24
Which two statements are correct when managing switches located in a Mist-managed site?
(Choose two.)
- A. The switch must be assigned to the site.
- B. A switch template must be assigned to the site.
- C. The site firewall must allow communications from the switch to Mist.
- D. The site must have Mist access points.
Answer: A,C
Explanation:
Reference: https://www.juniper.net/documentation/us/en/software/nce/nce-214-midsize-branch- mist-pwp/topics/topic-map/nce-214-midsize-branch-mist-example_part2.html
NEW QUESTION # 25
Which two statements are correct about microservices? (Choose two.)
- A. All microservices can be updated at the same time without downtime.
- B. A microservice can be updated without system downtime.
- C. Each microservice uses the same virtual hardware.
- D. A microservice can be added without system downtime.
Answer: B,D
NEW QUESTION # 26
Which two methods are supported for configuring a Mist environment? (Choose two.)
- A. Use the GUI.
- B. Use NETCONF.
- C. Use the CLI.
- D. Use the API.
Answer: A,D
NEW QUESTION # 27
A user device sends signal information to the Mist Location Engine. In this scenario, what is expected from the Mist Location Engine?
- A. product advertisements
- B. coordinates
- C. sensor device information
- D. login splash page
Answer: B
NEW QUESTION # 28
Which two statements correctly describe the encryption of traffic using Mist? (Choose two.)
- A. By default, the communication between an AP and a RADIUS server is not encrypted.
- B. By default, the communication between a Wi-Fi client and an AP is not encrypted.
- C. By default, the communication between a Wi-Fi client and an AP is encrypted.
- D. By default, the communication between an AP and a RADIUS server is encrypted.
Answer: A,C
Explanation:
AP and RADIUS Server Communication: By default, the communication between an Access Point (AP) and a RADIUS server is not encrypted. This can be configured to be encrypted, but it is not the default setting.
Wi-Fi Client and AP Communication: By default, the communication between a Wi-Fi client and an AP is encrypted, typically using WPA2 or WPA3, which ensures the data exchanged over the wireless network is secure.
Reference:
Mist Wireless Security Documentation
RADIUS Configuration Guide
NEW QUESTION # 29
Which Mist supported API is considered data-driven?
- A. RESTful
- B. WebSocket
- C. Webhook
- D. gRPC
Answer: A
NEW QUESTION # 30
You want to determine where you have coverage issues in your network using Marvis Actions.
Which Marvis Action category should you use in this situation?
- A. Application
- B. Connectivity
- C. Clients
- D. AP
Answer: D
NEW QUESTION # 31
...are asked to enable Mist management at an existing site with previously configured EX3400 brownfield switches, and to add a new greenfield switch, which statement is correct in this scenario?
- A. You cannot mix greenfield and brownfield switches at the same site.
- B. You can mix brownfield switches and greenfield switches as long as they are running a Mist-supported version of Junos.
- C. Brownfield switches can be adopted but not managed.
- D. You can mix brownfield switches and greenfield switches at the same site, but only if they are running the same version of Junos.
Answer: B
Explanation:
* In the context of Mist management, "brownfield" switches refer to those that are already configured and deployed in a network, while "greenfield" switches are new and have no pre-existing configuration.
* Mist supports the integration and management of both brownfield and greenfield switches within the same site. The crucial requirement is that all switches, regardless of their initial state, must be running a version of Junos that is supported by Mist.
* This compatibility ensures that Mist can apply policies, configurations, and monitoring uniformly across all devices, facilitating a seamless management experience.
* Reference: Juniper Networks documentation on Mist AI and Junos compatibility requirements.
NEW QUESTION # 32
Exhibit.
which two statements are correct? (Choose two.)
- A. To stay logged In. you will need to perform an action in Mist every 10 minutes regardless of which organization you are viewing.
- B. You will need to tog in to Mist every 60 minutes regardless of which organization you are viewing
- C. You will need to log in to Mist every 60 minutes as long as you are viewing this organization.
- D. To stay logged In. you will need to perform an action in Mist every 10 minutes as long as you are viewing this organization.
Answer: C,D
Explanation:
Identify the Statements:
Login frequency and actions needed to stay logged in.
Login Policies:
Users need to log in to Mist every 60 minutes if viewing a specific organization.
To stay logged in, users need to perform an action every 10 minutes within the organization.
Correct Statements:
You will need to log in to Mist every 60 minutes as long as you are viewing this organization.
To stay logged in, you will need to perform an action in Mist every 10 minutes as long as you are viewing this organization.
Conclusion:
The correct answers are A and C.
Reference:
Mist Documentation on Login Policies: Mist Documentation
NEW QUESTION # 33
Which two statements are true about Juniper Mist Wireless Assurance Radio Resource Management (RRM)? (Choose two.)
- A. RRM builds me channel plan based on a real-time assessment of the network.
- B. RRM builds the channel plan based on the physical distance between the APs.
- C. RRM tuning Is a manual process that you must Initiate every day.
- D. RRM tuning happens automatically.
Answer: A,D
Explanation:
Real-time Assessment: Juniper Mist's Radio Resource Management (RRM) builds the channel plan based on real-time network assessments. It dynamically adjusts to changing conditions in the RF environment, ensuring optimal performance by continuously monitoring factors such as interference, client distribution, and usage patterns.
Automatic Tuning: RRM tuning happens automatically. Mist AI leverages reinforcement learning to continually optimize RF settings without manual intervention, adjusting channels, power levels, and other parameters in real-time to maintain optimal network performance.
Reference:
Understanding Radio Resource Management | Juniper Networks
Radio Management | Mist | Juniper Networks
NEW QUESTION # 34
..scheduled downtime lo push the latest firmware to all the APs you deployed at the site. You verified that all of the APs are working fine. When you go back to work, you notice no complaints from the users. When you check AP page, you notice that several APs have not rolled out with the latest firmware.
his scenario, how does Marvis categorize this Issue in the Marvis Action dashboard?
- A. The non-compliant Marvis Action is displayed.
- B. The port flap Marvis Action is displayed.
- C. The missing VLAN Marvis Action is displayed.
- D. The high CPU Marvis Action is displayed.
Answer: A
Explanation:
* When several APs fail to update to the latest firmware during a scheduled downtime, Marvis categorizes this issue as a "non-compliant" action.
* This categorization indicates that some APs are not adhering to the intended firmware version policy, which could potentially affect network performance or security.
* The non-compliant Marvis Action provides administrators with the necessary information to identify and rectify the issue, ensuring all APs are updated as required.
* Reference: Juniper Networks documentation on Marvis Actions and firmware compliance.
NEW QUESTION # 35
......
Prepare for your Juniper certification with the updated ExamTorrent JN0-252 exam questions: https://drive.google.com/open?id=1Jx9kcf5l-IThbbCQXxuQ50iLJzPCttTa
Get Latest JN0-252 Dumps Exam Questions in here: https://www.examtorrent.com/JN0-252-valid-vce-dumps.html
