H31-341-ENU Exam Dumps - Try Best H31-341-ENU Exam Questions from Training Expert ExamTorrent
Practice Examples and Dumps & Tips for 2022 Latest H31-341-ENU Valid Tests Dumps
NEW QUESTION 22
The length range of the DATA field in the Ethernet frame structure is ().
- A. 46-1518 bytes
- B. 64-1500 bytes
- C. 46-1500 bytes
- D. 64-1518 bytes
Answer: C
NEW QUESTION 23
If you want to establish a GE-level path on the NMS, which of the following steps are required? (Multiple choice)
- A. Configure logical connection
- B. Create an OCh path
- C. Create an ODUk path
- D. Configure the wavelength
Answer: A,B,C,D
NEW QUESTION 24
Which of the following methods does the networking and application of NG WDM include? (Multiple choice)
- A. Mesh
- B. Ring
- C. Chain type
- D. Point to point
Answer: A,B,C
NEW QUESTION 25
For the whole network error test in the commissioning test, which of the following statement is correct? (Multiple choice)
- A. The duration of the full channel error test is 20 hours. If the error occurs within 20 hours, it needs to be retested for 20 hours after troubleshooting.
- B. To ensure the smooth passage of all channel services across the entire network, a 10-minute error prediction is required for each single channel.
- C. When the single channel error test is performed, the remote end needs to perform hardware loopback on the tributary board client side.
- D. The number of OTU boards or tributary boards connected in series for the whole channel error test is recommended to be no more than 13
Answer: B,C
NEW QUESTION 26
Which of the following description of the principle of automatic protection switching of the standard SSM protocol are correct? (Multiple choice)
- A. The network element broadcasts the clock quality information of the synchronization source to the downstream site through the S1 byte, and notifies the upstream station that the clock quality from the local network element is "not available for synchronization" by the S1 byte in the direction of the synchronization source.
- B. According to the clock source priority table, the network element first selects the clock with the highest quality level from the available clock sources as the homologous source.
- C. If there are multiple clock sources with the highest quality level, the network element selects the clock with the highest clock priority as the synchronization source.
- D. The network element broadcasts the clock quality information and the clock source ID of the synchronization source through the downstream station between the S1 bytes, and notifies the upstream station that the clock quality from the local network element is "not available for synchronization" by the S1 byte in the direction of the synchronization source.
Answer: A,B,C
NEW QUESTION 27
Which of the following monitoring boards do not support the processing and transparent transmission of 1588V2 signals? (Multiple choice)
- A. SC2
- B. SC1
- C. ST2
- D. AST2
Answer: A,B
NEW QUESTION 28
Which of the following is not a function of RSVP-TE?
- A. LSP deletion
- B. LSP rerouting
- C. LSP path optimization
- D. Establish neighbor relationship
Answer: D
NEW QUESTION 29
When the NNI port attribute is configured on the same subnet, the IP addresses of the ports on different links can be duplicated.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION 30
The following description of the signal flow of the OTM site (OSN 8800 device), which is wrong?
- A. OSC receiving direction: Line-> FIU-> Sc2
- B. Service transmission direction: SDH signals-> LSX-> M40V-> OBU1-> Line
- C. Service transmission direction: SDH signals-> LSX->M40V-> OBU1-> FIU-> Line
- D. Service receiving direction: Line->FIU-> OAU-> M40V-> LSX-> SDH signals
Answer: D
NEW QUESTION 31
Which of the following description of the ASON software structure is correct? (Multiple Choice)
- A. The transmission plane refers to the traditional transmission network.
- B. Intelligent software main application management plane
- C. Management plane mainly refers to upper management such as network management
- D. Intelligent optical network consists of three planes
Answer: A,C,D
NEW QUESTION 32
When the board detects that the error rate of the regenerator section signal exceeds 10 by detecting the B1 byte, the B1_SD alarm is reported.
- A. FALSE
- B. TRUE
Answer: A
NEW QUESTION 33
An OTN network uses WSMD4 to form a ROADM network element. After the logical fiber is created, the paths that can be directly searched are: (Multiple choice)
- A. OCh
- B. OMS
- C. Client
- D. OTS
Answer: A,B,D
NEW QUESTION 34
When the working channel of the optical line protection fails, it cannot be automatically switched to the protection channel. What are the possible reasons? (Multiple choice)
- A. Artificially issued a lock command
- B. Protection group parameter configuration is error
- C. Waiting for the recovery time to be set too long
- D. The protection channel is faulty
Answer: A,B,C,D
NEW QUESTION 35
The reasons for the discrete business are? (Multiple choice)
- A. The logical fiber connection of the network element is inconsistent with the physical fiber connection.
- B. There is an outbound subnet service whose source or sink port is not within the scope of network management.
- C. The network element side configuration data is not uploaded to the U2000.
- D. The cross-connection configuration on the network element is wrong.
Answer: A,B,C,D
NEW QUESTION 36
In the WDM system, what is the reason for the fiber attenuation and bit error rate? (Multiple Choice)
- A. Fiber damage
- B. Fiber aging
- C. Fiber bending
- D. Fiber break
Answer: A,B,C
NEW QUESTION 37
What are the functions of MPLS-TP OAM? (Multiple Choice)
- A. Fault location
- B. Alarm monitoring
- C. Fault management
- D. Performance monitoring
Answer: A,B,C,D
NEW QUESTION 38
Which of the following device types support the master-slave sub-architecture mode? (Multiple Choice)
- A. OSN 8800
- B. OSN 9800
- C. OSN 1800V
Answer: A,B,C
NEW QUESTION 39
The following description of discrete services, which are correct? (Multiple choice)
- A. Perform path search on the U2000 network management. Cross-connections that do not form a path are called discrete services.
- B. For a cross-connection, after the path search, it is either a discrete service or a path with other cross-connections, it is impossible to belong to both high-spread services and other cross-connections to form a path.
- C. Discrete service management requires the U2000 license to have path management functions.
- D. A service is searched for a discrete service, indicating that the service is not working properly on the network element side.
Answer: A,B,C
NEW QUESTION 40
......
Latest 100% Passing Guarantee - Brilliant H31-341-ENU Exam Questions PDF: https://www.examtorrent.com/H31-341-ENU-valid-vce-dumps.html
