[Mar-2025] Get 100% Real PSE-SoftwareFirewall Exam Questions, Accurate & Verified ExamTorrent Dumps in the Real Exam!
Pass Your PSE-Software Firewall Professional Exams Fast. All Top PSE-SoftwareFirewall Exam Questions Are Covered.
NEW QUESTION # 40
Which two elements of the Palo Alto Networks platform architecture enable security orchestration in a software-defined network (SDN)? (Choose two.)
- A. Dynamic Address Groups to adapt Security policies dynamically
- B. VXLAN support for network-layer abstraction
- C. NVGRE support for advanced VLAN integration
- D. Full set of APIs enabling programmatic control of policy and configuration
Answer: A,D
Explanation:
Full set of APIs enabling programmatic control of policy and configuration:
* Palo Alto Networks provides a comprehensive set of APIs that allow for the automation and orchestration of security policies and configurations in an SDN environment.
NEW QUESTION # 41
Which two configuration options does Palo Alto Networks recommend for outbound high availability (HA) design in Amazon Web Services using a VM-Series firewall? (Choose two.)
- A. Transit gateway and Security VPC
- B. Traditional active-active HA
- C. Traditional active-passive HA
- D. Transit VPC and Security VPC
Answer: A,D
Explanation:
* Transit Gateway and Security VPC:
* Using a transit gateway in conjunction with a Security VPC is a recommended design for outbound high availability (HA) in AWS. This configuration ensures that traffic can be routed efficiently and securely through the VM-Series firewalls deployed in the Security VPC.
NEW QUESTION # 42
Which two mechanisms could trigger a high availability (HA) failover event? (Choose two.)
- A. Heartbeat polling
- B. Session polling
- C. Link monitoring
- D. Ping monitoring
Answer: C,D
Explanation:
Ping monitoring:
* This mechanism involves monitoring the reachability of a specified IP address. If the firewall cannot ping the address, it may trigger a failover.
NEW QUESTION # 43
Which two methods of Zero Trust implementation can benefit an organization? (Choose two.)
- A. Security automation is seamlessly integrated.
- B. Compliance is validated.
- C. Boundaries are established.
- D. Access controls are enforced.
Answer: A,D
Explanation:
Zero Trust implementation revolves around the principle that no entity, inside or outside the network, should be trusted by default. The primary methods that benefit an organization are:
* Security automation is seamlessly integrated: Zero Trust requires continuous monitoring and verification of every device and user attempting to access resources. Automation helps in efficiently managing these processes, ensuring that security policies are consistently enforced without human error.
Automated tools can quickly detect anomalies, respond to threats, and update access controls dynamically.
NEW QUESTION # 44
How are CN-Series firewalls licensed?
- A. Service-plane vCPU
- B. Management-plane vCPU
- C. Data-plane vCPU
- D. Control-plane vCPU
Answer: C
Explanation:
Data-plane vCPU Licensing:
* The CN-Series firewalls are licensed based on the number of data-plane vCPUs. This licensing model reflects the processing power dedicated to handling traffic and security enforcement within the containerized environment.
NEW QUESTION # 45
What can be implemented in a CN-Series to protect communications between Dockers?
- A. Firewalling
- B. Runtime security
- C. Vulnerability management
- D. Data loss prevention (DLP)
Answer: A
Explanation:
In a CN-Series (Cloud Native) environment, protecting communications between Docker containers is crucial.
CN-Series firewalls are designed to provide advanced firewalling capabilities within containerized environments:
* Firewalling: The CN-Series firewall provides Layer 7 visibility, allowing for application-layer security policies and protections. It ensures that all inter-container traffic is inspected, filtered, and secured according to the defined security policies. This includes blocking malicious traffic, preventing unauthorized access, and providing micro-segmentation within the Kubernetes clusters.
*
NEW QUESTION # 46
Which of the following can provide application-level security for a web-server instance on Amazon Web Services (AWS)?
- A. Hardware firewalls
- B. Terraform templates
- C. VM-Series firewalls
- D. Security groups
Answer: C
Explanation:
VM-Series firewalls provide advanced application-level security for web-server instances on AWS. These virtual firewalls leverage Palo Alto Networks' next-generation firewall capabilities to offer features like application identification, threat prevention, and URL filtering, ensuring comprehensive security for web applications hosted on AWS.
References:
* Palo Alto Networks VM-Series on AWS: VM-Series on AWS
* AWS Security Best Practices:AWS Security Best Practices
NEW QUESTION # 47
Which protocol is used for communicating between VM-Series firewalls and a gateway load balancer in Amazon Web Services (AWS)?
- A. Geneve
- B. VRLAN
- C. GRE
- D. VMLAN
Answer: A
Explanation:
Geneve (Generic Network Virtualization Encapsulation) is the protocol used for communication between VM-Series firewalls and a Gateway Load Balancer (GWLB) in AWS. Geneve provides a flexible encapsulation method and is specifically supported for integrating with AWS GWLB to ensure seamless traffic flow and security inspection.
References:
* AWS Gateway Load Balancer Documentation:AWS GWLB
* Palo Alto Networks Integration Guide: Integrating VM-Series with AWS GWLB
NEW QUESTION # 48
Which type of group allows sharing cloud-learned tags with on-premises firewalls?
- A. Notify *
- B. Template
- C. Device
- D. Address
Answer: D
Explanation:
* Address Group:
* Address groups in Palo Alto Networks firewalls allow for the grouping of multiple addresses or address objects. This capability enables the sharing of cloud-learned tags with on-premises firewalls, facilitating the consistent application of security policies across hybrid cloud environments.
NEW QUESTION # 49
Which two actions can be performed for VM-Series firewall licensing by an orchestration system? (Choose two.)
- A. Registering an authorization code
- B. Downloading a content update
- C. Renewing a license
- D. Creating a license
Answer: A,B
Explanation:
Registering an Authorization Code:
* An orchestration system can automate the registration of authorization codes, which is a critical step in licensing the VM-Series firewall. This process involves submitting the code to Palo Alto Networks to activate the license.
NEW QUESTION # 50
Which two features of CN-Series firewalls protect east-west traffic between pods in different trust zones?
(Choose two.)
- A. External load balancer (ELB)
- B. Intrusion prevention system (IPS)
- C. Communication with Panorama
- D. Layer 7 visibility
Answer: B,D
Explanation:
* Intrusion Prevention System (IPS):The CN-Series firewalls incorporate an Intrusion Prevention System to detect and prevent exploits and attacks on applications and systems. This feature is essential for securing east-west traffic, as it can identify and block threats within the data center traffic between pods in different trust zones.
* Layer 7 Visibility:CN-Series firewalls provide Layer 7 (application layer) visibility, enabling deep inspection of application traffic. This allows the firewall to understand and enforce policies based on the application and its behavior, rather than just ports and protocols, ensuring comprehensive security for east-west traffic within a Kubernetes environment.
References:
* Palo Alto Networks CN-Series Datasheet: CN-Series Datasheet
* Palo Alto Networks CN-Series Documentation: CN-Series Documentation
NEW QUESTION # 51
Which two mechanisms could trigger a high availability (HA) failover event? (Choose two.)
- A. Heartbeat polling
- B. Session polling
- C. Link monitoring
- D. Ping monitoring
Answer: C,D
NEW QUESTION # 52
A customer in a VMware ESXi environment wants to add a VM-Series firewall and partition an existing group of virtual machines (VMs) in the same subnet into two groups. One group requires no additional security, but the second group requires substantially more security.
How can this partition be accomplished without editing the IP addresses or the default gateways of any of the guest VMs?
- A. Create a new virtual switch and use the VM-Series firewall to separate virtual switches using virtual wire mode. Then move the guests that require more security into the new virtual switch.
- B. Create a Layer 3 interface in the same subnet as the VMs and then configure proxy Address Resolution Protocol (ARP).
- C. Send the VLAN out of the virtual environment into a hardware Palo Alto Networks firewall in Layer 3 mode. Use the same IP address as the old default gateway, then delete it.
- D. Edit the IP address of all of the affected VMs.
Answer: A
Explanation:
Creating a New Virtual Switch:
* By creating a new virtual switch, you can segment the network within the ESXi environment. The VM-Series firewall can then be used to provide security controls between these virtual switches using virtual wire mode.
NEW QUESTION # 53
Which Palo Alto Networks firewall provides network security when deploying a microservices-based application?
- A. HA-Series
- B. CN-Series
- C. PA-Series
- D. VM-Series
Answer: B
Explanation:
* The CN-Series firewalls are specifically designed to secure Kubernetes and containerized environments, making them ideal for protecting microservices-based applications. They provide network security by integrating directly with the container orchestration platform.
NEW QUESTION # 54
What can software next-generation firewall (NGFW) credits be used to provision?
- A. Enablement of DNS security
- B. Migrating NGFWs from hardware to VMs
- C. Virtual Panorama appliances
- D. Remote browser isolation
Answer: A
Explanation:
Software next-generation firewall (NGFW) credits can be used to enable DNS security on Palo Alto Networks firewalls. These credits allow customers to activate DNS Security service, which provides real-time protection against DNS-based threats by leveraging machine learning and continuous analysis.
References:
* Palo Alto Networks DNS Security: DNS Security
* Palo Alto Networks Licensing Guide: Software NGFW Credits
NEW QUESTION # 55
What do tags allow a VM-Series firewall to do in a virtual environment?
- A. Enable machine learning (ML).
- B. Provide adaptive reporting.
- C. Integrate with security information and event management (SIEM) solutions.
- D. Adapt Security policy rules dynamically.
Answer: D
Explanation:
Tags in a VM-Series firewall environment allow administrators to dynamically adjust security policy rules based on changes within the virtual environment. These tags can be used to label and categorize virtual machines (VMs) or other entities within the environment, and policies can be created to automatically respond to these tags. This facilitates adaptive security measures that align with the current state and requirements of the environment.
References:
* Palo Alto Networks VM-Series Deployment Guide: Dynamic Address Groups and Tags
NEW QUESTION # 56
Which component allows the flexibility to add network resources but does not require making changes to existing policies and rules?
- A. Dynamic address group
- B. Content-ID
- C. App-ID
- D. External dynamic list (EDL)
Answer: A
Explanation:
Dynamic address groups in Palo Alto Networks firewalls provide flexibility by allowing network resources to be added without requiring changes to existing policies and rules:
* Dynamic address group: These groups automatically update based on tags and attributes assigned to network objects. When new resources are added with the appropriate tags, they are dynamically included in the address group, and the associated policies automatically apply to them without manual intervention.
NEW QUESTION # 57
What Palo Alto Networks software firewall protects Amazon Web Services (AWS) deployments with network security delivered as a managed cloud service?
- A. Cloud next-generation firewall (NGFW)
- B. CN-Series
- C. Ion-Series Ion-Series
- D. VM-Series
Answer: A
Explanation:
The Cloud NGFW by Palo Alto Networks is a managed cloud service designed to provide advanced network security capabilities within AWS deployments. This service leverages Palo Alto Networks' technology to deliver scalable and comprehensive security without the need for users to manage the infrastructure themselves. It is ideal for organizations looking to integrate robust security within their cloud environments efficiently.
References:
* Palo Alto Networks Cloud NGFW for AWS: Cloud NGFW for AWS
* AWS Marketplace:Cloud NGFW for AWS
NEW QUESTION # 58
Which two public cloud platforms does the VM-Series plugin support? (Choose two.)
- A. Azure
- B. IBM Cloud
- C. Amazon Web Services (AWS)
- D. OCI
Answer: A,C
Explanation:
The VM-Series plugin supports integration with multiple public cloud platforms, including:
* Amazon Web Services (AWS):The VM-Series firewalls can be deployed in AWS to provide comprehensive security for cloud applications and data, leveraging AWS's native services and integration capabilities.
* Azure:The VM-Series firewalls also integrate with Microsoft Azure, offering advanced security features and policies for applications and data hosted in Azure's cloud environment.
References:
* Palo Alto Networks VM-Series on AWS: VM-Series on AWS
* Palo Alto Networks VM-Series on Azure: VM-Series on Azure
NEW QUESTION # 59
How is traffic directed to a Palo Alto Networks firewall integrated with Cisco ACI?
- A. Through a virtual machine (VM) monitor domain
- B. By creating an access policy
- C. By using contracts between endpoint groups that send traffic to the firewall using a shared policy
- D. Through a policy-based redirect (PBR)
Answer: C
Explanation:
In Cisco ACI, traffic is directed to a Palo Alto Networks firewall by creating contracts between endpoint groups (EPGs) that send traffic to the firewall. These contracts define the policy for communication between EPGs, ensuring that traffic is inspected and secured by the firewall before reaching its destination.
References:
* Cisco ACI and Palo Alto Networks Integration Guide: Contracts and Policies
* Cisco ACI Fundamentals: ACI Contracts
NEW QUESTION # 60
Which element protects and hides an internal network in an outbound flow?
- A. DNS sinkholing
- B. NAT
- C. User-ID
- D. App-ID
Answer: B
Explanation:
NAT (Network Address Translation) protects and hides an internal network in an outbound flow by translating internal private IP addresses to a public IP address. This process masks the internal IP addresses from external networks, providing security and privacy for the internal network. NAT is commonly used in outbound traffic to allow multiple devices on a local network to communicate with external networks while appearing as a single IP address.
References:
* Palo Alto Networks NAT Configuration Guide: NAT Configuration
* Palo Alto Networks Concepts: NAT
NEW QUESTION # 61
Which two routing options are supported by VM-Series? (Choose two.)
- A. OSPF
- B. RIP
- C. IGRP
- D. BGP
Answer: A,D
Explanation:
The VM-Series firewalls support various dynamic routing protocols to ensure efficient and resilient network traffic management. Among these, OSPF (Open Shortest Path First) and BGP (Border Gateway Protocol) are supported. OSPF is used for intra-domain routing, while BGP is essential for inter-domain routing, allowing VM-Series to participate in complex and scalable network topologies.
References:
* Palo Alto Networks VM-Series Deployment Guide: VM-Series Deployment Guide
* Palo Alto Networks Administrator's Guide: Routing Protocols
NEW QUESTION # 62
When implementing active-active high availability (HA), which feature must be configured to allow the HA pair to share a single IP address that may be used as the network's gateway IP address?
- A. Floating IP address
- B. ARP load sharing
- C. HSRP
- D. VRRP
Answer: A
Explanation:
When implementing active-active high availability (HA), a floating IP address must be configured to allow the HA pair to share a single IP address that may be used as the network's gateway IP address. This floating IP address ensures that either of the active-active firewalls can assume control of the traffic without interruption in case of a failover.
References:
* Palo Alto Networks High Availability Guide: Active-Active HA Configuration
* Palo Alto Networks HA Configuration: HA Configuration
NEW QUESTION # 63
What is a design consideration for a prospect who wants to deploy VM-Series firewalls in an Amazon Web Services (AWS) environment?
- A. High availability (HA) clusters are limited to fewer than 8 virtual appliances.
- B. Only active-passive high availability (HA) is supported.
- C. Resources are shared within the cluster.
- D. Special AWS plugins are needed for load balancing.
Answer: B
Explanation:
In AWS, VM-Series firewalls support only active-passive high availability (HA) configuration. This means that one firewall is active and processing traffic, while the other remains passive and takes over in the event of a failure. This design consideration ensures continuous availability and reliability of firewall services in the AWS environment.
References:
* Palo Alto Networks VM-Series Deployment Guide for AWS: VM-Series Deployment Guide
* Palo Alto Networks HA Configuration Guide: HA Configuration
NEW QUESTION # 64
......
Penetration testers simulate PSE-SoftwareFirewall exam: https://www.examtorrent.com/PSE-SoftwareFirewall-valid-vce-dumps.html
Free Test Engine For Palo Alto Networks Systems Engineer (PSE): Software Firewall Professional Certification Exams: https://drive.google.com/open?id=1HrU5g4j2mtKAzL9aNj96ZydOYTzc9RNv
