[Nov 16, 2024] Passing Key To Getting DC0-200 Certified Exam Engine PDF
DC0-200 Exam Dumps Pass with Updated Nov-2024 Tests Dumps
What is the duration of the DC0-200 Exam
- Format: Multiple choices, multiple answers
- Number of Questions: 55
- Length of Examination: 80 minutes
- Passing Score: 700
How to book the DC0-200 Exam
These are following steps for registering the DC0-200 exam. Step 1: Visit to Pearson VUE Exam Registration Step 2: Signup/Login to Pearson VUE account Step 3: Search for Dell DC0-200 Exam Certifications Exam Step 4: Select Date, time and confirm with payment method
NEW QUESTION # 13
What type of security authentication scheme is used by OMSA under Windows 2000?
- A. SNMP
- B. NTLM
- C. NDS
- D. PAM
Answer: B
NEW QUESTION # 14
Which two statements are true about executing Server Diagnostics using OMSA? (Choose two.)
- A. You can schedule, in advance, as many as three groups of tests to be executed.
- B. You must have Admin or Power User privileges to execute the diagnostic tests.
- C. You can click Result History to see a record of the results of diagnostic tests that have already been executed.
- D. Because a group of tests is executed simultaneously, no other operations should be performed during the tests.
- E. The Diagnostic Service is not supported on Red Hat Linux systems.
Answer: B,C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 15
What is a dynamic volume as defined by Array Manager?
- A. a logical volume created from portions of one or more basic disks
- B. a physical disk that has been marked as dynamic by Array Manager
- C. a volume that resides in the extended partition of a basic disk
- D. a logical volume that can be created from a dynamic disk
Answer: D
NEW QUESTION # 16
You select the RAID Configuration Utility from the Utility Partition menu. This takes you to the _____.
- A. PERC BIOS
- B. CERC BIOS
- C. Array Manager
- D. system setup
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 17
What are four valid event actions in ITA? (Choose four.)
- A. a Windows event log insertion
- B. an e-mail message
- C. an alert popup
- D. a page
- E. a forward event
Answer: A,B,C,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 18
Which two are provided by riser boards? (Choose two.)
- A. processor mounting parallel to the system board in 2U, quad processor systems
- B. redundant power conditioning and distribution for power redundant systems
- C. PCI slots parallel to the system board in 1U and 2U systems
- D. a place to connect up to 16 DIMMs in 4U and larger systems
Answer: C,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 19
You need to create a supported driver diskette from the DSA . How do you put the DSA in service mode?
- A. insert the DSA CD into a server running a supported OS
- B. enter the command DSA.EXE /service at a command prompt
- C. boot the server from a floppy disk
- D. boot the server from the Dell OpenManage IT Assistant CD
Answer: A
NEW QUESTION # 20
The system administrator notices the Dell badge on the front of the server is flashing orange on the PowerEdge 2650. What utility should the system administrator load to determine the cause of the flashing diagnostic indicator?
- A. Dell Server Assistant
- B. OpenManage Server Administrator
- C. OpenManage Array Manager
- D. Dell Client Configuration Utility
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 21
OpenManage Server Administrator can determine the status of which two server components? (Choose two.)
- A. fans
- B. processor load
- C. network activity
- D. disk utilization
- E. memory
Answer: A,E
NEW QUESTION # 22
If there is a loss of power redundancy on your PowerEdge server, in which three ways can Dell OpenManage IT Assistant report this? (Choose three.)
- A. Dell IT Assistant sends an alert to Dell OpenManage Server Administrator.
- B. The status panel for that system indicates which power supply failed.
- C. Systems Status is marked as "Warning" in OpenManage IT Assistant.
- D. An SNMP trap can be logged in the OpenManage IT Assistant.
Answer: B,C,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 23
Which two operations can be performed with the DSA CD? (Choose two.)
- A. create Windows 2000 driver/utilities diskette(s)
- B. change the Dell Service Tag via the Service Tag Utility
- C. run system diagnostics on your server
- D. create NetWare 5.1/6.0 driver/utilities diskette(s)
Answer: A,D
NEW QUESTION # 24
Which visual clue alerts you that a virtual disk requires a signature to be written to it?
- A. A green plus sign appears on the virtual disk.
- B. A yellow "bang" appears on the virtual disk.
- C. A red dot with a minus sign appears on the virtual disk.
- D. A blue plus sign appears on the virtual disk.
Answer: C
NEW QUESTION # 25
What happens when you specify a Preferred Primary Adapter in Windows 2000 for an AFT NIC team?
- A. You specify the desired card for all outgoing traffic for the team. The other members will still accept incoming packets.
- B. You specify the desired card for all incoming traffic for the team. The other members will still transmit outgoing packets.
- C. You specify which adaptor will take the load until it is saturated, then the other members will start accepting packets until the Preferred Primary is just below the saturation point.
- D. You specify which adaptor will take the entire load. The other NICs will be used only when the Preferred Primary fails.
Answer: D
NEW QUESTION # 26
You can obtain the Dell Utility Partition in which two ways? (Choose two.)
- A. It can be installed from the OpenManage Documentation CD.
- B. It is included on the hard drive from the factory.
- C. Download the install file from www.dell.com.
- D. It can be installed from the DSA CD before an OS is installed.
Answer: B,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 27
You are configuring network teaming on a PowerEdge server. The server has Windows 2000 installed and you do not know what network adapters are in the system. Without physically opening the chassis, what are two ways to see which network adapters are installed using the operating system? (Choose two.)
- A. right-click My Computer, select Manage, left-click Device Manager, expand Network Adapters, and view installed adapters
- B. type ipconfig /all at the command prompt; on the description line, the manufacturer and device type will be named
- C. type ifconfig -a at a command prompt; on the description line, the manufacturer and device type will be named
- D. right-click Network Neighborhood, select Properties, double-click Internet Protocol (TCP/IP), and view protocol-bound adapters
Answer: A,B
NEW QUESTION # 28
The system administrator notices the Dell badge on the front of the server is flashing orange on the PowerEdge 2650. What utility should the system administrator load to determine the cause of the flashing diagnostic indicator?
- A. Dell Server Assistant
- B. OpenManage Server Administrator
- C. OpenManage Array Manager
- D. Dell Client Configuration Utility
Answer: B
NEW QUESTION # 29
What is the correct NIC teaming for the Intel Proprietary Method to accomplish fault tolerance?
- A. AFT
- B. SLB
- C. ALB
- D. ATF
Answer: A
NEW QUESTION # 30
You have just installed W2K on your server and you cannot get the server to see your local network. What can you do to diagnose network connectivity? (Choose three.)
- A. verify that the cable plugged into your server is not a cross-over cable
- B. verify that the subnet address is the same as the rest of the working devices on your LAN
- C. verify that the server is configured to use DNS
- D. verify that if attached to a switch and using VLANs, your port is in the proper configuration
Answer: A,B,D
NEW QUESTION # 31
What is the purpose of the battery on a PERC?
- A. maintains the PERC BIOS settings
- B. saves the cache contents during a power loss
- C. provides power to the PERC controller
- D. preserves the hard drive configuration
Answer: B
NEW QUESTION # 32
Which is the appropriate method to change or migrate from RAID-5 to RAID-0 using Array Manager with an Adaptec PERC?
- A. Reconfigure
- B. Rearrange Virtual Disk
- C. Switch RAID Type
- D. Rebuild Array
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 33
Which three hard drive partitions must be defined during the automated Linux installation process?
(Choose three.)
- A. swap
- B. root
- C. boot
- D. logs
- E. data
Answer: A,B,C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 34
You have the PowerEdge server running Red Hat Linux Advanced Server Operating System. You want to be able to accomplish the following: -- report health of all system components -- change System Reset Timer value under the Auto Recovery tab -- save Command Log under the Logs tab -- set the Beep Speaker on the Server Alert Action under Alert Management tab -- view details in About box Which two access privileges allow you to accomplish these tasks? (Choose two.)
- A. root user
- B. any valid user
- C. any valid user with root privileges
- D. administrator user
Answer: A,C
NEW QUESTION # 35
Which three tasks can be accomplished using the System Setup Utility of a Dell PowerEdge Server?
(Choose three.)
- A. change the Asset Tag information
- B. enable the SCSI/RAID controller
- C. change the boot order
- D. enable or disable all integrated devices in the system
Answer: B,C,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 36
......
DC0-200 exam questions for practice in 2024 Updated 120 Questions: https://www.examtorrent.com/DC0-200-valid-vce-dumps.html
Updated Premium DC0-200 Exam Engine pdf: https://drive.google.com/open?id=1nexzXvMyrVmk6bx_jl3w2_O2N38548m-
