[Oct 16, 2024] Lesson Brilliant PDF for the NACE-CIP1-001 Tests Free Updated Today
Get New 2024 Valid Practice CIP Level 1 NACE-CIP1-001 Q&A - Testing Engine
NACE NACE-CIP1-001 (Coating Inspector Level 1) Certification Exam is a challenging and comprehensive exam that tests the knowledge and skills of individuals seeking a career in the coating inspection industry. Passing NACE-CIP1-001 exam is a great achievement and can open up many opportunities for individuals who want to advance their careers. Coating Inspector Level 1 certification program is recognized globally and is highly respected by employers in the industry, making it a valuable asset for anyone interested in pursuing a career in coating inspection.
NEW QUESTION # 23
Whenever dissimilar metals must join, the most common practice is to
- A. avoid coating all connected dissimilar metals.
- B. provide cathodic protection to prevent corrosion,
- C. provide anodic protection to prevent corrosion.
- D. coat all connected dissimilar metals.
Answer: D
NEW QUESTION # 24
Removal of welds splatter is required:
- A. When specifically identified in the owner's specification
- B. When ISO abrasive blast standards are specified
- C. When NACE/SSPC abrasive blast standards are specified
- D. On every job
Answer: A
NEW QUESTION # 25
What is the minimum recommended distance away from an edge that an inspector should take a measurement with a dial-type magnetic pull-off Dry Film Thickness (DFT) gauge?
- A. 1 cm (.39 inch)
- B. 2.5 millimeters (.10 inch)
- C. 6.35 cm (2.5 inch)
- D. 2.5 cm (1 inch)
Answer: D
NEW QUESTION # 26
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:
- A. Advise the Contractor of your readings
- B. Advise the Contractor he cannot proceed
- C. Call your supervisor
- D. Advise the Contractor he can proceed
Answer: A
NEW QUESTION # 27
Inspection documentation is important because:
- A. It is the only deliverable item provided by the inspector
- B. a) only
- C. a) & b)
- D. Owners use the documentation for a variety of purposes
Answer: D
NEW QUESTION # 28
Good records can provide maintenance departments with detailed information about ALL of the following EXCEPT
- A. what materials were used.
- B. when the coating will be reapplied.
- C. how the item was coated.
- D. what items were coated.
Answer: C
NEW QUESTION # 29
Stripe coats are generally applied to:
- A. Edges and corners
- B. a), b), and c)
- C. Complex geometric shapes
- D. Welds
Answer: B
NEW QUESTION # 30
When holiday testing is required the Inspector is always required to enforce NACE SP 0188:
- A. False
- B. True
Answer: B
NEW QUESTION # 31
Polymerization is the process of:
- A. Monomers telegraphing
- B. All organic coatings
- C. Monomers joining together
- D. All thermoplastic coatings
Answer: C
NEW QUESTION # 32
According to SSPC PA 2 a Spot Measurement is:
- A. The average of gauge readings taken in a 4cm (1.5 inch) circle
- B. A single gauge reading
- C. The overall average of all readings
- D. The average of all spot measurements in a given area
Answer: A
NEW QUESTION # 33
Removal of surface contaminants is done by:
- A. A combination of methods
- B. Abrasive blasting
- C. Scarifying
- D. Waterjetting
Answer: A
NEW QUESTION # 34
ISO ST 3 is described as:
- A. Thorough blast cleaning
- B. Thorough hand tool cleaning
- C. Very Thorough power tool cleaning
- D. Very Thorough hand or power tool cleaning
Answer: D
NEW QUESTION # 35
When working as a NACE Inspector in a situation where there is a difference of opinion, the Inspector needs to:
- A. Never change his/her mind
- B. Go with the majority opinion
- C. Call the supervisor
- D. Achieve consensus through negotiation
Answer: C
NEW QUESTION # 36
The main responsibilities of the inspector are to
- A. observe and report the quality of the work performed.
- B. observe and direct the work of the contractors.
- C. direct and perform the work stated in the specification.
- D. demonstrate to the contractor how to apply the coating.
Answer: A
NEW QUESTION # 37
You ate the NACE Inspector on a job where NACE No. 2/SSPC - SP 10 has been specified. You are finding the Contractor is leaving mill scale on the on surface and as a result you have been rejecting the blast. The Contractor is very upset and has told you that the standard permits up to 5% of the mill scale to remain and still be in be in compliance with the standard.
Your FIRST preferred course of action is to:
- A. Call your supervisor
- B. Permit coating to take place so as not to lose the blast
- C. Shut the job down
- D. Review the relevant standard with the Contractor
Answer: D
NEW QUESTION # 38
A successful coating inspector must be able to
- A. look for problems or issues during application.
- B. recommend the appropriate coating technique for the job to the contractor.
- C. apply the coating with expert accuracy.
- D. advise the coating applicator on how to mix the coating.
Answer: A
NEW QUESTION # 39
......
NACE-CIP1-001 Dumps PDF - 100% Passing Guarantee: https://www.examtorrent.com/NACE-CIP1-001-valid-vce-dumps.html
Latest NACE-CIP1-001 PDF Dumps & Real Tests Free Updated Today: https://drive.google.com/open?id=1ACPxp9J7hJ-NXw6ABuZxRKc1wzO-0Oii
