[Oct 31, 2024] 100% Real & Accurate MB-335 Questions with Free and Fast Updates
Self-Study Guide for Becoming an Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert Expert
Microsoft MB-335 certification exam is designed for professionals who are interested in becoming a certified Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert. MB-335 exam is designed to test the candidate's knowledge and skills in implementing and configuring supply chain management solutions using Microsoft Dynamics 365. By passing MB-335 exam, candidates can demonstrate their expertise in this area and enhance their career prospects.
Microsoft MB-335 (Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert) exam is designed to test your skills and expertise in using Microsoft Dynamics 365 Supply Chain Management. Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert certification is intended for those who have extensive experience in streamlining business processes, identifying and resolving issues, and ensuring the successful implementation and operation of the Dynamics 365 Supply Chain Management application.
NEW QUESTION # 54
You need to configure production operations for the pine and orange scent solutions.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Configure the BOM line to be of type Vendor and associate the corresponding vendor account.
- B. Configure the inventory policy for the item model group to set the value of the Stocked product option to Yes.
- C. Allocate subcontracted work in its own cost breakdown block.
- D. Use a purchase agreement as a service agreement.
- E. Configure a costing resource and requirement to point to a Vendor type resource.
Answer: A,C,E
NEW QUESTION # 55
You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints.
You need to set up a new item for the car audio system.
How should you create the new product? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Product Master
Configuration
Constraint-based configuration
The Constraint-based configuration configuration technology can only be defined if the configuration dimension is the only active dimension on the product dimension group.
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/set-up-maintain-product-configuration-model
NEW QUESTION # 56
You need to configure each item for plastic manufacturing.
Which production types should you use? To answer, select the appropriate option in the answer area.
NOTE:Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
A screenshot of a computer Description automatically generated
NEW QUESTION # 57
A company plans to implement routing and route postings.
You must direct positing of route cards based upon the route group at Report as finished. You set the start default order for route posting to Never and the Report as finished to Route Group Dependent.
You set up the route group as shown below.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection it worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 58
You are the production scheduler at a manufacturing company. You schedule estimated production orders and ensure that capacity is used efficiently.
You have an order that must be scheduled at the resource group level and scheduled backward from the delivery date specified on the production order.
You need to schedule the order.
Which scheduling parameters should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/operation-sch
NEW QUESTION # 59
You use the master planning module for Dynamics 365 Supply Chain Management.
Planned production orders have been created.
Several sales orders are canceled in response to concerns about recent online reviews of a product.
You need to enable the appropriate action message.
Which action message should you enable?
- A. Advance
- B. Derived actions.
- C. Decrease
- D. Postpone
- E. Increase
Answer: C
Explanation:
Explanation
The action message that you should enable is Decrease. Here is the explanation:
An action message is a system-generated suggestion to change an existing planned, approved, or firmed order. Action messages are generated by the master planning calculation in response to changed requirements1. For example, the ship date or quantity is changed on a sales order after you've already created a purchase order to fulfill the demand for that sales order. In this case, the master planning calculation generates one or more action messages that suggest that you update the purchase order. You decide whether to make the changes that are suggested.
The Decrease action message indicates that production orders, purchase orders, and other receipt transactions should be decreased to prevent excess inventory levels1. This action message is generated when there is less demand for a product than was previously planned. For example, if several sales orders are canceled, the master planning calculation will generate a Decrease action message for the corresponding planned production orders.
To enable the Decrease action message, you must select it on the Coverage groups page for the coverage group or item that you want the message to apply to1. You can also specify a decrease margin, which is the minimum percentage difference between the current quantity and the suggested quantity that will trigger a Decrease action message1.
NEW QUESTION # 60
You need to configure the system to track the cost and delivery performance of VendorZ.
Which two actions should you perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Create a service product and set Stocked product - Yes.
- B. Add an activity to the production flow for deliveries.
- C. Add an activity to the production route for deliveries.
- D. Create a service product and set Stocked product = No.
Answer: A,C
NEW QUESTION # 61
A company makes lubricants and greases used in the automotive industry. The company plans to implement Dynamics 365 Supply Chain Management.
The system must meet the following requirements:
* Schedule the batch production of products.
* Plan for inventory fluctuations of ingredients that are used across different products.
* Schedule delivery of amounts of proprietary compounds used during production from vendors to keep production runs on schedule and eliminating excess stock on hand or delayed production.
You need to perform the initial setup of the company's Dynamics 365 environment.
At which level should you set up the items? To answer, drag the appropriate setup levels to the correct setup options. Each setup level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 62
A manufacturer is implementing Dynamics 365 Supply Chain Management to create blends of oil and industrial lubricant.
The manufacturer requires detailed documentation for the production order process before manufacturing begins for the products. The shop floor must review, approve, and anticipate all production runs. Before production starts, the manufacturer wants to ensure that the order can be completed by a certain timeframe based on capacity.
You need to define the production life cycle stages.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
To define the production life cycle stages, you should perform the following actions in sequence:
* Create a production order. A production order is a document that authorizes the production of a specific product or product variant in a given quantity on a specific date1. You can create a production order manually, from a sales order line, or from master planning execution2.
* Estimate the order. Estimating a production order calculates the material and capacity requirements for the order based on the bill of materials (BOM) and the route3. You can also estimate the cost and revenue of the order based on the planned consumption and output.
* Schedule production jobs. Scheduling production jobs determines the start and end dates and times for each operation in the route based on the available capacity, efficiency, and calendar of the resources.
You can use either operations scheduling or job scheduling methods to schedule production jobs.
* Release the order. Releasing a production order makes it available for picking, production, and reporting activities. You can release an order manually or automatically based on a release rule that specifies criteria such as site, warehouse, status, priority, or start date.
* Generate a picking list. A picking list is a document that lists the materials that must be picked from inventory and consumed for production. You can generate a picking list for an entire production order or for selected jobs or operations within an order.
1: Production process overview 2: Production order lifecycle overview 3: Estimate a production order :
[Estimate cost and revenue for a production order] : [Schedule production jobs] : [Scheduling methods] :
[Release a production order] : [Release rules] : [Picking list overview] : [Generate picking lists]
NEW QUESTION # 63
A manufacturing company is implementing Dynamics 365 Supply Cham Management.
Bill of materials (BOMs) must be calculated using standard cost principles.
Miscellaneous charges must be included in the unit cost price. The explosion mode must arways be enforced as single level.
You need to configure the system to meet the requirements.
Which configuration should you enable for each requirement? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 64
A bicycle manufacturing company is implementing Dynamics 365 Supply Chain Management.
The warehouse must pick and stage parts other than paint for bicycle assembly. Paint is at the production station.
You need to configure the reservations for production.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
To configure the reservations for production, you should do the following:
Define configuration for paint reservation: You should configure the Item model group for paint. The Item model group determines the inventory policies for an item, such as reservation, tracking, and costing1. You can set the reservation policy for paint to FIFO date-controlled, which means that the inventory reservation is controlled by a sorting date according to the FIFO principle2. You can also set the Backward from ship date option, which means that the inventory reservation is controlled by the last update physical date according to the FIFO rule2.
Define the reservation principle for paint: You should set the reservation principle to Start. This means that inventory is reserved when production starts3. This way, you can ensure that paint is available at the production station when needed
NEW QUESTION # 65
You are the production supervisor in charge of setting effective cost prices for the labor force in a manufacturing company.
It is the end of the year and the labor rates have been recalculated based on new salary data.
You need to update the effective labor costs for all labor groups.
Which element must be updated?
- A. cost groups
- B. cost category
- C. production orders
- D. resource group
- E. shared category
Answer: B
Explanation:
A cost category is a classification of costs that are related to an operations resource or a routing operation1. A cost category can have one or more cost elements, such as labor, machine, subcontractor, or material1. A cost element represents a specific type of cost that is incurred for an operations resource or a routing operation2.
To update the effective labor costs for all labor groups, you must update the cost category that is assigned to the labor groups. You can use the Cost categories page to modify the cost elements and rates for the cost category3. You can also use the Costing versions page to create a new costing version with updated cost categories and activate it for future production orders.
NEW QUESTION # 66
You need to configure the system to meet the requirements.
What should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 67
A company implements Dynamics 365 for Finance and Operations. You must use functionality in the system for group production runs to prevent downtime and excessive cleaning of the machines on the production line.
You need to set up the system.
Which behaviors should you expect? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 68
A company uses separate finished good item numbers for size variations of the same product.
The company wants to minimize the number of variously-sized items that are created.
You need to perform the setup to allow variants in size to the product master.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
NEW QUESTION # 69
A bicycle manufacturing company is implementing Dynamics 365 Supply Chain Management.
The warehouse must pick and stage parts other than paint for bicycle assembly. Paint is at the production station.
You need to configure the reservations for production.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
To configure the reservations for production, you should do the following:
* Define configuration for paint reservation: You should configure the Item model group for paint. The Item model group determines the inventory policies for an item, such as reservation, tracking, and costing1. You can set the reservation policy for paint to FIFO date-controlled, which means that the inventory reservation is controlled by a sorting date according to the FIFO principle2. You can also set the Backward from ship date option, which means that the inventory reservation is controlled by the last update physical date according to the FIFO rule2.
* Define the reservation principle for paint: You should set the reservation principle to Start. This means that inventory is reserved when production starts3. This way, you can ensure that paint is available at the production station when needed
NEW QUESTION # 70
You need to create the constraint for the ML seat selection.
Which expression constraint should you use?
- A. Implies[Seat==ML,Trim==Legend]
- B. Implies[Trim==Legend,Seat==ML]
- C. Seat!=ML
- D. [Trim==Legend|Seat==ML]
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/expression-constraints-table-constraints-product-configuration-models
NEW QUESTION # 71
You need to determine the batch values on the combined mix batches for OperatorA.
Which values should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
A screenshot of a computer Description automatically generated
NEW QUESTION # 72
You are a manufacturer using Druitt 365 Supply Cham Management
A new series of orders is authorized for production.
You need to identify which documents to use for the released production order.
Which document should you use tor each requirement? to answer drag the appropriate documents to the correct requirements. Each document nay be used once more than once. or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 73
A company plans to use master planning in Dynamics 365 Supply Chain Management. The company will sell items between legal entities.
The company has several facilities across legal entities that can manufacture the same products. Same products are produced only in some plants. To meet product demand, when one facility is over capacity, another facility is used to fulfill the downstream demand.
The organizational entities are:
* LegalEntityA: Plant 1.2, and 3
* LegalEntityB: Plant4and 5
* LegalEntityC: Plant 6. 7, and 8
The following plants must be planned together:
* Plant 1. Plant 3. and Plant 4
* Plant 2. Plant 6. and Plant 8
* Plant 5 and Plant 7
You need to configure master planning for the facilities.
Which configuration mechanism should you use?
- A. Item model groups
- B. Production groups
- C. Coverage groups
- D. Intercompany planning groups
Answer: D
Explanation:
The configuration mechanism that you should use is Intercompany planning groups. Here is the explanation:
Intercompany planning groups are groups of companies that are planned together in master planning. Intercompany planning groups allow you to include planned downstream demand from other companies in your master plan, and also to peg across companies by using multilevel pegging1. You can use intercompany planning groups to plan for intercompany sales and purchases, and to optimize the production capacity across companies1.
In this scenario, you need to configure master planning for the facilities that must be planned together. To do this, you should create intercompany planning groups that include the relevant plants from different legal entities. For example, you can create an intercompany planning group that includes Plant 1, Plant 3, and Plant 4 from LegalEntityA and LegalEntityB. You can also specify the scheduling sequence for the companies in the intercompany planning group, which determines the order in which master planning is run for each company1.
The other options are not correct, because they do not involve intercompany planning. Production groups are groups of production orders that share the same parameters, such as ledger accounts and posting profiles2. Item model groups are groups of items that share the same inventory policies, such as reservation, tracking, and costing3. Coverage groups are groups of items that share the same coverage settings, such as coverage code, period, and time fence.
1: Intercompany planning 2: Production groups 3: Item model groups : [Coverage groups]
NEW QUESTION # 74
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP 01 to represent the painting service.
You need to create a subcontracting activity for the painting service.
Solution:
* Create a vendor warehouse for the subcontracting vendor.
* Create a vendor resource and add it to a new work cell for outsource painting.
* Create a production flow transfer activity and specify the vendor warehouse as The target warehouse.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
The solution does not meet the goal. Here is the explanation:
To create a subcontracting activity for the painting service, you should use the following steps1:
Create a vendor warehouse for the subcontracting vendor. This step is correct, because you need to create a warehouse that is assigned to the vendor account and set it as vendor-managed1. This way, you can track the inventory that is located at the vendor's site.
Create a vendor resource and add it to a new work cell for outsource painting. This step is correct, because you need to create a resource that is assigned to the vendor account and add it to a resource group that represents the subcontracting work cell1. This way, you can assign the subcontracting activity to the vendor resource.
Create a production flow transfer activity and specify the vendor warehouse as the target warehouse. This step is incorrect, because you need to create a production flow process activity, not a transfer activity, for the subcontracting service1. A process activity represents an operation that transforms material into products or semi-finished goods2. A transfer activity represents a movement of material or products from one location to another2. You also need to specify the service item (SP 01) as the product of the process activity, and select the Generate license plate option on the mobile device menu item that is used for reporting as finished1.
NEW QUESTION # 75
......
MB-335 Study Guide Realistic Verified MB-335 Dumps: https://www.examtorrent.com/MB-335-valid-vce-dumps.html
MB-335 Questions & Practice Test are Available On-Demand: https://drive.google.com/open?id=1CCIxOkLZloKsV3UGpSeUCekrN6ic6IVo
