Pass Your Exam With 100% Verified CWDP-305 Exam Questions
CWDP-305 Dumps PDF - CWDP-305 Real Exam Questions Answers
NEW QUESTION # 122
What operational plane would a WNMS primarily interact with?
Response:
- A. Distribution
- B. Integration
- C. Management
- D. Data
- E. Control
Answer: C
NEW QUESTION # 123
What are the deliverables to your customer after successfully implementing a WLAN infrastructure?
- A. Project Charter
- B. Digital or physical assets, guides, floorplans and configuration documents
- C. Nothing is required. The implemented WLAN was deliverable
- D. Facility blueprints
Answer: B
NEW QUESTION # 124
Your customer requires fast secure roaming. Which two types of roaming are specified in 802.11-2016 FT roaming that will help meet this goal?
- A. FT and OKC
- B. Over-the-Air and Over-the-DS
- C. FT and TKIP
- D. Over-the-Air and Over-the-Wire
Answer: B
NEW QUESTION # 125
Your customer has selected switches that support 802.3bz MultiGig interfaces and 4x4:4 802.11ac Wave 2 APs with dual-5GHz capabilities. The APs have one MultiGig interface, and some cable runs will exceed
180.5 feet (55 meters). To support MultiGig speeds, which is the best cabling option?
- A. Cat-5e
- B. Cat-6a
- C. Cat-6
- D. Cat-5
Answer: A
NEW QUESTION # 126
What differences exist between VLANs in wireless and wired domains?
Response:
- A. Wireless VLANs are not effective for segmenting the available services and network permissions available to clients. Wired VLANs are effective for this purpose.
- B. Wireless VLANs are never carried in 802.11 frames that cross the wireless medium. VLAN identifiers are always carried in Ethernet frames to indicate the proper VLAN.
- C. Wireless VLANs do not always segment traffic into separate broadcast domains on the wireless medium. Wired VLANs do segment broadcast domains on the wired network.
- D. Wireless VLANs are not an effective way to utilize a single set of infrastructure equipment to provide different services to different client groups. Wired VLANs are effective for this purpose.
Answer: C
NEW QUESTION # 127
In the enterprise, when is WPA/WPA2-Personal generally a recommended solution?(Choose all that apply.) Response:
- A. When client devices do not support 802.1X/EAP
- B. When client devices are provisioned in bulk and would otherwise share 802.1X credentials
- C. When the network security policy demands that each user have unique access credentials
- D. When mobile device applications require high-latency roaming times between APs
Answer: A,B
NEW QUESTION # 128
Which DHCP option, when required, should be configured and enabled to help APs locate their wireless LAN controller?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 129
When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical for improving data flow by reducing retries caused by the long distances?
- A. The CTS-to-self threshold
- B. The minimum transmit data rate value
- C. The sequence control field value
- D. The acknowledgement timeout threshold
Answer: D
NEW QUESTION # 130
What term refers to the security practice of obfuscating actual data from unintended receivers as the data crosses the transmission medium?
- A. Confidentiality
- B. Nonrepudiation
- C. Authentication
- D. Integrity
- E. Accounting
Answer: A
Explanation:
Confidentiality is a core principle of information security that involves keeping data hidden or inaccessible from unauthorized users. In the context of WLANs, confidentiality is maintained through encryption protocols such as WPA2/WPA3, which ensure that even if a data transmission is intercepted, its contents remain unreadable to unintended receivers.
From the CWDP-305 Study Guide, confidentiality is defined as:
"The protection of transmitted data from unauthorized disclosure. This is typically accomplished through encryption methods that obscure the original content, ensuring that intercepted packets cannot be deciphered by unintended recipients." Other security terms like authentication (verifying identity), integrity (ensuring data is not altered), and nonrepudiation (assurance of origin) are also important but pertain to different aspects of data protection.
- Reference: CWDP-305 Official Study and Reference Guide, Chapter on Wireless Design Process
NEW QUESTION # 131
What are the best practices for belter location accuracy when deploying Wi-Fi RTLS?
- A. Place APs on the center of the required area and make sure that every client device is able to hear at least two APs
- B. Place APs on the perimeter and throughout the required area and make sure that every client device is able to "hear" at least three APs
- C. Place APs on the perimeter of the required area and make sure that every client device is able to "hear" at least one AP
- D. Place APs on the center of the required area and make sure that every client device is able to hear" at least three APs
Answer: B
NEW QUESTION # 132
An MSA commonly addresses at least which two legal categories?
Response:
- A. Hold harmless
- B. Nondisclosure agreement
- C. Indemnity clause
- D. Intellectual property protection
Answer: B
NEW QUESTION # 133
You are being asked to design a WLAN for a number of WLAN clients that will use Telnet as the primary application. The customer has asked that you use only the number of APs necessary because of the complex installation and construction costs each AP installation will incur in this particular environment.
What design factors do you consider?
Response:
- A. Omnidirectional antennas should be used to maximize cell overlap.
- B. Clients could benefit from RTS/CTS mode for all transmissions.
- C. Use 11 Mbps as the lowest basic rate.
- D. AP transmit power should be turned down to minimize co-channel interference.
Answer: B
NEW QUESTION # 134
What is the purpose of DHCP Option 43, and how is it used with WLANs?
- A. It supports vendor-specific IP address attributes for node discovery purposes. APs use Option 43 with vendor class identifiers to obtain the IP address of a centralized WLAN controller.
- B. It provides IP address bindings for specific network nodes that require long-term IP address assignments. WLAN controllers are configured to use Option 43 to receive long-term IP address leases that are centrally managed with DHCP.
- C. It provides clients with a temporary IP address on a restricted VLAN until 802.1X authentication is completed. Then the client receives its long-term IP address.
- D. It integrates a DHCP server with AAA servers and user databases to dynamically assign IP addresses to client devices. During 802.1X, the AAA server uses DHCP Option 43 to assign IP addresses based on user credentials.
Answer: A
Explanation:
DHCP Option 43 is utilized to provide vendor-specific information to DHCP clients. In WLAN deployments, particularly with lightweight access points (APs), Option 43 is used to convey the IP address of the Wireless LAN Controller (WLC) that the AP should join. The AP includes a Vendor Class Identifier (Option 60) in its DHCP Discover message, and the DHCP server responds with Option 43 containing the WLC's IP address.
This mechanism facilitates the automatic discovery and association of APs with their respective controllers, streamlining network deployment and management.Cisco Reference: CWDP-305 Official Study and Reference Guide, Chapter on Infrastructure Design
NEW QUESTION # 135
What is a valid 40 MHz channel configuration in the 2.4 GHz ISM band where channels 1-11 are permitted?
- A. 2 (primary), -1 (secondary)
- B. 4 (primary), +1 (secondary)
- C. 1 (primary), 6 (secondary)
- D. 8 (primary), +1 (secondary)
Answer: B
Explanation:
In the 2.4 GHz band, 40 MHz channels are formed by bonding two adjacent 20 MHz channels. The primary channel is the one the client uses to initiate communication, and the secondary channel is either above (+1) or below (-1) the primary.
For channel 4 as primary with a +1 secondary offset:
Primary channel: 4 (2.427 GHz)
Secondary channel: 5 (2.432 GHz)
This configuration stays within the allowed channels 1-11.
Reference: CWDP-305 Official Study and Reference Guide, Chapter on ProtocolandSpectrum Analysis
NEW QUESTION # 136
A business traveler from North America is in Europe. The hotel only provides coverage in 2.4 GHz. The traveler connects to the hotel's SSID and notices an AP in the hotel room.
However, the laptop reports a very low RSSI when connected. The traveler does not have the same problem when connecting in the lobby.
What would be the most likely cause of the low RSSI in the hotel room?
Response:
- A. The AP in the room is using ZigBee instead of Wi-Fi.
- B. The AP in the room is using Bluetooth instead of Wi-Fi.
- C. The AP in the room is transmitting on channel 13 and the traveler associated to a non-channel 13 AP located elsewhere.
- D. The switchport that the AP is connected to is only capable of transmitting at 10 Mbps.
Answer: C
NEW QUESTION # 137
While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure.
What should you do to prevent this?
Response:
- A. Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken
- B. Purchase and deploy new APs from a different vendor
- C. Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11
- D. Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result
Answer: C
NEW QUESTION # 138
What type of standards-based encryption is used by office extension APs for the traffic tunnel?(Choose all that apply.) Response:
- A. DTLS
- B. TKIP
- C. LWAPP
- D. AES
- E. CAPWAP
Answer: A,E
Explanation:
CAPWAP and DTLS are the type of standards-based encryption used by office extension APs for the traffic tunnel. Office extension APs are wireless access points that can be deployed in remote locations and connect to a central wireless controller via a secure tunnel over the Internet. CAPWAP is the Control and Provisioning of Wireless Access Points protocol, which defines how the wireless controller and the office extension APs communicate and exchange control and data messages. DTLS is the Datagram Transport Layer Security protocol, which provides encryption and authentication for the CAPWAP tunnel. DTLS is based on TLS, but it uses UDP instead of TCP as the transport layer protocol, which makes it more suitable for real-time applications. DTLS protects the CAPWAP tunnel from eavesdropping, tampering, and replay attacks, and ensures the confidentiality and integrity of the wireless traffic. References: CWNP, CWDP Certified Wireless Design Professional Official Study Guide, Configure OEAP and RLAN on Catalyst 9800 WLC, Hardening Microsoft 365, Office 2021, Office 2019 and Office 2016
NEW QUESTION # 139
Your customer requires a security solution where client credentials are used, not a Protected Access Credential (PAC), and the authentication server must have a certificate with optional client certificate use. Which EAP (Extensible Authentication Protocol) method is the best fit for these requirements?
- A. EAP-TLS
- B. LEAP
- C. EAP-TTLS
- D. EAP-FAST
Answer: C
NEW QUESTION # 140
Main Topic:ProtocolandSpectrum Analysis
Question:
Modulation can be defined as:
- A. The process of representing data using RF coding
- B. The process of encoding data symbols using a carrier frequency
- C. The process of modifying a carrier signal to represent data
- D. The process of incorporating a chipping code to build resilience
Answer: C
Explanation:
Comprehensive and Detailed Explanation:
Modulation is the technique of varying a carrier signal's properties-such as amplitude, frequency, or phase- to encode and transmit data. This process allows the transmission of information over various mediums, including radio frequencies used in wireless communications.
Option A:Describes spread spectrum techniques, not modulation.
Option B:Is a partial description but lacks the specificity of how the carrier is modified.
Option D:Is a vague statement that doesn't accurately define modulation.
Reference:CWDP-305 Study Guide, Chapter on RF Fundamentals - Modulation Techniques.
NEW QUESTION # 141
As a device starts to shift to lower PHY rates, what factors usually influence a device decision to shift to lower PHY rates?(Choose all that apply.)
- A. Packet loss
- B. Retransmissions
- C. Interference
- D. Signal degradation
Answer: A,B,C,D
NEW QUESTION # 142
......
CWNP CWDP-305 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
CWDP-305 Dumps 100 Pass Guarantee With Latest Demo: https://www.examtorrent.com/CWDP-305-valid-vce-dumps.html
Prepare CWDP-305 Question Answers Free Update With 100% Exam Passing Guarantee [2026]: https://drive.google.com/open?id=1erkkqiepvuyx6Z1RLwMH7hoOIu8b92-_
