[Sep-2022] 2V0-41.20 Dumps are Available for Instant Access using ExamTorrent
2V0-41.20 Dumps 2022 - New VMware 2V0-41.20 Exam Questions
NEW QUESTION 42
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. vSphere Distributed Switch 7.0
- B. MTU 1400
- C. MTU 1500
- D. vSphere Distributed Switch 6.5
- E. MTU 1600
Answer: A,E
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-BA34FB2A-6780-41C5-B895-F37E5A7B7BAE.html
NEW QUESTION 43
Which is correct when deploying a NSX Edge in a KVM only environment?
- A. deploy NSX Edge VM with QCOW2 image
- B. deploy NSX Edge VM with OVF template
- C. deploy NSX Edge VM with ISO image
- D. deploy NSX Edge on a bare-metal server
Answer: D
NEW QUESTION 44
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. SNAT
- B. Reverse NAT
- C. DNAT
- D. 1:1 NAT
Answer: A
NEW QUESTION 45
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get transport-node tunnel state
- B. get transport-node tunnel status
- C. get host-switch <Host-Switch-Name> tunnel status
- D. get host-switch <Host-Switch-Name> tunnels
Answer: D
NEW QUESTION 46
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
- B. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
- C. esxcli network diag ping -H <destination IP address>
- D. esxcli network diag ping -I vmk0 -H <destination IP address>
Answer: A
NEW QUESTION 47
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. ifconfig
- B. debug
- C. tcpdump
- D. ipconfig
Answer: A
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-
NEW QUESTION 48
What are three characteristics of a transport zone? (Choose three.)
- A. configured with a Single N-VDS
- B. configured with multiple N-VDS
- C. optional for creating a segment
- D. defines the potential reach of transport nodes
- E. defines the scope and reachability of a Segment
Answer: A,D,E
NEW QUESTION 49
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. must have only active-active edge nodes
- B. can have a maximum of 8 edge nodes
- C. can contain multiple types of edge nodes (VM or bare metal)
- D. can have a maximum of 10 edge nodes
- E. must contain only one type of edge nodes (VM or bare metal)
Answer: C,D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-E8D72E198D5A.html
NEW QUESTION 50
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Port Mirroring
- B. Activity Monitoring
- C. IPFIX
- D. Switch Visualization
Answer: D
NEW QUESTION 51
What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?
- A. Cloud Service Administrator
- B. Network Engineer
- C. NSX Administrator
- D. Network Operator
Answer: B
NEW QUESTION 52
Where are Distributed Firewall logs containing access decisions stored?
- A. Hypervisor transport node
- B. NSX Edge
- C. NSX API
- D. NSX Manager
Answer: D
NEW QUESTION 53
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)
- A. Segment Port
- B. Segment
- C. Group
- D. Tier-1 Gateway
- E. DFW
Answer: C,E
NEW QUESTION 54
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
- A. join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>
- B. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint <nsx-manager-thumbprint>
- C. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
<nsx-manager-thumbprint> - D. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>
Answer: D
NEW QUESTION 55
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB SNAT IP Routes
- B. Advertise All NAT Routes
- C. All Static Routes
- D. Advertise All LB VIP Routes
- E. Information
Answer: A,D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95A7-7645BA562D62.html
NEW QUESTION 56
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A. get timezone
- B. set ntp-server
- C. et time-server
- D. set timezone
Answer: B
NEW QUESTION 57
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. stateful services leveraged
- B. increased north/south bandwidth
- C. traffic predictability
- D. Failover of services
- E. traffic load balancing
Answer: B,E
Explanation:
Explanation
From ICM manual:
Equal-cost multipath (ECMP) routing has several features and functions: * ECMP routing increases the north-south communication bandwidth by combining multiple uplinks.
* ECMP routing performs traffic load balancing.
* ECMP routing provides fault tolerance for failed paths.
* A maximum of eight ECMP paths are supported.
* Hashing is based on 2-tuple IP source and destination addresses.
* ECMP routing is only available on Tier-0 gateways.
NEW QUESTION 58
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Local AS
- B. BGP Neighbors
- C. Route Aggregation
- D. Graceful Restart
- E. Route Distribution
Answer: B,E
NEW QUESTION 59
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?
- A. set cli-timeout disabled
- B. set cli-timeout 1
- C. set cli-timeout 0
- D. set cli-timeout enabled
Answer: C
Explanation:
Explanation
"
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
https://www.virten.net/2020/06/quick-tip-remove-nsx-t-ssh-and-http-session-timeout/
NEW QUESTION 60
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh start <NSX-Manager-Name>
- B. virsh poweron <nsx-manager-ID>
- C. virsh poweron <nsx-manager-name>
- D. virsh start <NSX-Manager-ID>
Answer: A
NEW QUESTION 61
......
VMware 2V0-41.20 Exam Practice Test Questions: https://www.examtorrent.com/2V0-41.20-valid-vce-dumps.html
Free 2V0-41.20 Braindumps Download Updated: https://drive.google.com/open?id=1QYiglTkaWzX2C4Pl6utKnMMQ_QjW3DMu
