Unique Top-selling 1Z0-996-21 Exams - New 2022 Oracle Pratice Exam
Oracle Utilities Customer Cloud Dumps 1Z0-996-21 Exam for Full Questions - Exam Study Guide
NEW QUESTION 40
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?
- A. in the Device Type
- B. in the Usage Rule Type
- C. in the Measuring Component Type
- D. in the Service Point Type
- E. in the Usage Subscription Type
Answer: E
NEW QUESTION 41
Your client has installed scalar devices to measure the solar energy generated (Export) and the energy received (Import) from the National Grid. This data is stored in separate measuring components (registers).
The validation rules are generally the same for both measuring components, but there is one exception. The Negative Consumption check applies only to energy received (import).
Which two are possible configurations resulting in the Negative Consumption rule being checked for energy received (import) only? (Choose two.)
- A. Use Eligibility Criteria.
- B. Use the Skip Flag in the VEE rule.
- C. Remove the Negative Consumption check from the VEE group.
- D. Create two different VEE groups.
- E. Modify the base VEE rule.
Answer: A,D
NEW QUESTION 42
Which three are important Account concepts that must always be followed? (Choose three.)
- A. Accounts expire when there are no active contracts.
- B. An Account references one or more persons.
- C. Every Account has a unique, system-assigned Account ID.
- D. Bills are produced for an account and are sent to the account persons.
- E. An Account can only reference one and only one person at one time.
Answer: C,D,E
NEW QUESTION 43
Which statement supports usage transaction calculation?
- A. Bill determinants are derived from the initial measurement data of the measuring components installed at the usage subscription's devices during the calculation period.
- B. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period.
- C. Bill determinants are derived from the final measurements for only interval measuring components or devices installed at the usage subscription's service points during the calculation period.
- D. Bill determinants are derived from the initial measurement data of the measuring components devices installed at the usage subscription's service points during calculation period.
Answer: B
NEW QUESTION 44
At what stage in the initial measurement data (IMD) import process will the application of meter multipliers be performed?
- A. post-VEE
- B. Prepare for VEE
- C. VEE
- D. Critical Validation
Answer: D
NEW QUESTION 45
Which major entities hold the key geographic, demographic, and financial information related to a customer who is financially responsible for a property?
- A. Account, Bill, Premise, Service Agreement, Service Port
- B. Account, Customer Class, Premise, Service Agreement, Service Port
- C. Account, Person, Premise, Service Agreement, Service Port
- D. Account, Bill, Customer Class, Premise, Service Agreement
- E. Account, Customer Class, Person, Premise, Service Agreement
Answer: C
NEW QUESTION 46
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control if and how the General Ledger entries are created.
- B. They control how the payoff balance is affected.
- C. They control when a Financial Transaction is to be swept onto a bill.
- D. They control how the current balance is affected.
- E. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
Answer: A,B,C
NEW QUESTION 47
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. Critical Validation, High/Low Check Validation, and Sum Check Validation
- B. Sum Check Validation
- C. Multiplier Check Validation
- D. Critical Validation
- E. High/Low Check Validation
Answer: C
NEW QUESTION 48
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specific activity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Device
- B. Service Point
- C. Device Configuration
- D. Smart Meter Command
Answer: B
NEW QUESTION 49
What Service Order activity types does the application include?
- A. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
- B. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
- C. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
- D. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
Answer: A
NEW QUESTION 50
How do you ensure that specific Validation, Editing, and Estimation (VEE) rules are applied to estimated measurements?
- A. by adding the estimation rules to the Manual Override VEE Group to the Measuring Component Type
- B. by adding the VEE Group to the Device Configuration Type
- C. by adding the VEE Group to the Device Type
- D. by adding the VEE Group as the Fallback VEE Group for the appropriate VEE role
Answer: A
NEW QUESTION 51
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Complete
- B. Low
- C. Issue
- D. Information
- E. Terminate
Answer: C,D,E
NEW QUESTION 52
Which three statements are correct for Adjustment Types? (Choose three.)
- A. They can default an Adjustment Amount to adjustments.
- B. They control the valid Adjustment Profiles that adjustment types can belong to.
- C. They control whether a rate is to be called to calculate an adjustment amount.
- D. They control the valid Service Agreement Types that adjustments can be linked to.
- E. They control how adjustments appear on bills.
Answer: C,D,E
NEW QUESTION 53
How many Tenders can a Payment Event have?
- A. one Tender for each account the payment is applied to
- B. no Tenders for Payment Events, only Payment Segments
- C. no Tenders for Payment Events, only Payments
- D. one Tender per Payment Event
- E. one Tender for each form of Payment submitted
Answer: E
NEW QUESTION 54
Your client has the following requirements:
Many customers are installing their own solar electrical generation equipment. When these customers generate more electricity than required for their own use, the surplus can he exported back to the power grid.
In order to measure this generation, we have installed special scalar devices. These devices have separate registers to measure the energy generated (export) and the energy received (import) from the National Grid. Both reads will be stored in kWh, but the import is subtractive and export is consumptive.
What solution should you choose to configure the measuring component types for these specific requirements?
- A. Create one new measuring component type for creating a new measuring component that will be linked to two different scalar devices (one for import and the other for export).
- B. Create two new measuring component types (one for subtractive import and the other for consumptive export) to enable the creation of two measuring components that will be linked to one scalar device.
- C. Create one new measuring component type for creating two measuring components (one for import and the other for export) that will be linked to one scalar device.
- D. Create two service points: one for subtractive import and the other for consumptive export.
Answer: B
NEW QUESTION 55
How many service agreements are linked to a severance process?
- A. one
- B. zero - accounts are linked to severance processes
- C. all service agreements that are connected to the initiating collection process
- D. all service agreements that are connected to the initiating overdue process
- E. any number defined by the business user
Answer: E
NEW QUESTION 56
Which statement correctly describes the relation between a device and a measuring component?
- A. A device can have any combination of interval and/or scalar measuring components.
- B. A device configuration links a device only to interval channels.
- C. A device should have only one measuring component type.
- D. Two measuring components on the same device should have the same Units of Measure (UOM).
Answer: A
NEW QUESTION 57
How many bill segment-related financial transactions do pay plans have?
- A. depends on the number of bills that will contain the customer's pay plan commitments
- B. one
- C. depends on the number of payments that is part of the pay plan
- D. none
- E. unlimited
Answer: A
NEW QUESTION 58
Critical validation rules verify the integrity of the initial measurement data (IMD). If an implementation needs toadd new critical validations, where would you configure them?
- A. in the pre-processing algorithm of the IMD Seeder BO (Dl-IMDSeeder)
- B. as options on the IMD Seeder BO (D1-IMDSeeder)
- C. in the schema of the IMD Seeder BO (D1-IMDSeeder)
- D. in the validation algorithm on the IMD Seeder BO (D1-IMDSeeder)
- E. as new lifecycle algorithms on the IMD Seeder BO (D1-IMDSeeder)
Answer: A
NEW QUESTION 59
In addition to sets of procedures, and careful handling instructions for hazardous or delicate materials, what can Specifications include to provide information about assets or other entities?
- A. Rules
- B. Conditions
- C. Attributes
- D. Specifications
Answer: D
NEW QUESTION 60
Your implementation requires an installation of two types of devices:
Electric Smart Meter
Gas Manual Meter
Which two Device Type attributes are required to identify these device types? (Choose two.)
- A. Valid Measuring Component Types
- B. Serial Number
- C. Service Type
- D. Device Business Object
- E. Manufacturer
Answer: A,C
NEW QUESTION 61
Throughout its lifecycle, an asset's disposition changes as it is moved between locations and service statuses.
Which are valid asset dispositions?
- A. In Receipt; Installed; In Stores; Retired
- B. In Receipt; In Field; In Stores; Retired
- C. Receiving; In Field; Storage; Retired
- D. Receiving; Installed; Storage; Retired
Answer: B
NEW QUESTION 62
How should you configure the derived values that are relevant for a device?
- A. Configure the derived values on the Measuring Component Type for the measuring components to be defined on the device.
- B. Configure the derived values on the Final Measurement Type for the measuring components to be defined on the device.
- C. Configure the derived values on the Device Type for the derived values to be defined on the device.
- D. Configure the derived values on the Measuring Component for the measuring components to be defined on the device.
Answer: B
NEW QUESTION 63
What determines an Account's Balance?
- A. the sum of all the Financial Transactions linked directly to the service agreements related to the account
- B. the amount recorded in the "Balance Due" field on an account
- C. the logic defined in a plug-in spot on the Installations Option
- D. the sum of all the Financial Transactions linked directly to the account
- E. the sum of all the balances recorded in the "Balance Due" field on each service agreement related to the account
Answer: D
NEW QUESTION 64
Which two plug-in spots can call the rating functionality using base package-supplied algorithm types? (Choose two.)
- A. Bill Segment Type - Bill Segment Create
- B. Bill Segment Type - Bill Segment FT Creation
- C. Billable Charge Template
- D. Adjustment Type - Generate
- E. Adjustment Type - Adjustment FT Creation
Answer: B,E
NEW QUESTION 65
......
Best way to practice test for Oracle 1Z0-996-21: https://www.examtorrent.com/1Z0-996-21-valid-vce-dumps.html
1Z0-996-21 Dump Ready - Exam Questions and Answers: https://drive.google.com/open?id=1o8KzMAjtuK-Nmspgo1a0Q0Ub3ktiN7av
