Updated May 31, 2023 Verified Pass C-IBP-2211 Exam in First Attempt Guaranteed
Free C-IBP-2211 Sample Questions and 100% Cover Real Exam Questions (Updated 80 Questions)
To be eligible for the SAP C-IBP-2211 Certification Exam, candidates must have a minimum of two years of practical experience with SAP IBP for Supply Chain. It is also recommended that candidates have completed the SAP IBP training courses to ensure they have a comprehensive understanding of the SAP IBP for Supply Chain platform. The certification exam consists of 80 multiple-choice questions and has a time limit of 180 minutes.
NEW QUESTION # 29
For which of the following application jobs can you enter planning filters as parameters?Note: There are
2 correct answers to this question.
- A. Purge Key Figure Data
- B. Purge Master Data
- C. Create Time Periods for Time Profiles
- D. Purge Non-Conforming Data
Answer: A,B
NEW QUESTION # 30
Analytics charts are created by the user in the Advanced Analytics application.What can the user do in the Advanced Analytics app?Note: There are 2 correct answers to this question.
- A. Apply filters on your data.
- B. Open graphics in Excel.
- C. Group data.
- D. Merge charts together.
Answer: A,C
NEW QUESTION # 31
What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.
- A. Rename the charts.
- B. Link two analytics charts.
- C. Use drill-down functionality.
- D. Display all assigned analytics on a single UI.
- E. Add process templates.
Answer: C,D,E
NEW QUESTION # 32
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.
- A. Configure at least one calculated key figure for the planning area.
- B. Configure at most two input key figures on the same planning level in a key figure calculation.
- C. Assign the compound master data type and its component master data types.
- D. Specify a planning horizon in the planning area for each level of the assigned time profile.
Answer: C,D
NEW QUESTION # 33
Which features apply to quota violations modeled with the optimizer?
- A. The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.
- B. Because quota violations shouldn't be possible, the non-delivery cost rate is less than quota violation cost.
- C. Min and Max Quotas have to be the same as sourcing ratios.
- D. Quotas can be modeled for sourcing location, production, and consensus demand.
Answer: B
NEW QUESTION # 34
Why would you set up a cascading filter in the planning view?Note: There are 2 correct answers to this question.
- A. To filter data in an Application Job template
- B. To filter attributes based on specific values
- C. To filter attributes based on other attribute filters
- D. To filter using attributes that have a large number of values
Answer: B,D
NEW QUESTION # 35
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Non-Confirming Data
- B. Purge Key Figure Data
- C. Purge Key Figure Data Outside Planning Area Planning Horizon
- D. Purge Master Data
Answer: B
NEW QUESTION # 36
You have to be logged on to two separate SAP IBP tenants.What can help you differentiate the appearance of their user interfaces?Note: There are 2 correct answers to this question.
- A. Setting a separate theme for the Home page in the Web UI.
- B. Having a different set of tiles in the Home group of apps.
- C. Defining a different default planning area via the User Preferences.
- D. Add the system name and tenant information from the About section to the Home page.
Answer: A,D
NEW QUESTION # 37
You are working with inventory key figures.What are some of the business scenarios where you can use the Last Period Aggregation function?Note: There are 2 correct answers to this question.
- A. Calculating the value of inventory on any time profile level ensuring flexibility of calculation
- B. Calculating the value of inventory on a weekly basis, using static aggregation from the daily level
- C. Search for and return the last not null value of the inventory key figure
- D. Calculating how many periods inventory is going to last based on the planned demand
Answer: C,D
NEW QUESTION # 38
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Navigate to the Manage Master Data app and open the Log.
- B. Download the Initial Problem Report in the Data Integration app.
- C. Download the Rejection Report in the Data Integration app.
- D. Navigate to the Master Data Workbook in Excel and open the Log.
Answer: A
NEW QUESTION # 39
You created a key figure and want to add calculations.Which of the following rules do you consider?Note: There are 2 correct answers to this question.
- A. Key figures can be calculated across different planning levels.
- B. The calculation chain for a key figure must always result in a calculated key figure.
- C. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
- D. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
Answer: A,D
NEW QUESTION # 40
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.
- A. Target Service Level
- B. Minimum Lot Size
- C. Holding Cost Percentage
- D. Transportation Lead Time Error CV
Answer: A,B
NEW QUESTION # 41
Forecast Error CV is an input to which of the following?
- A. Forecast Error Calculation in Inventory Planning Profile Operator
- B. Time-Series-Based Supply Planning Optimizer
- C. Calculate Target Inventory Components in Inventory Planning Profile Operator
- D. Multistage Inventory Optimization in Inventory Planning Profile Operator
Answer: D
NEW QUESTION # 42
You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.Which settings can you change and still run a successful consistency check?Note: There are 2 correct answers to this question.
- A. Change the past and future horizon of the levels in the time profile.
- B. Change the description of the attributes in the time profile.
- C. Change the numbering hierarchy of the period IDs in the time profile.
- D. Add a new time profile level to the time profile.
Answer: A,B
NEW QUESTION # 43
You are configuring disaggregation for the KF1 key figure in the Planning Areas Model Configuration app.Which methods can you use?Note: There are 3 correct answers to this question.
- A. Disaggregation in batch triggered by an application job
- B. Proportional disaggregation by using KF2 in the expression
- C. Disaggregation according to a helper key figure
- D. Disaggregation according to a user-defined expression
- E. Disaggregation according to an equal split
Answer: B,D,E
NEW QUESTION # 44
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?
- A. Adjusted production interactive values
- B. Production source validity at the start of seasonal peak
- C. Capacity expansion with additional costs
- D. Incremental production values
Answer: C
NEW QUESTION # 45
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?
- A. Created as type NVARCHAR and assigned to an external master data type
- B. Created as type DECIMAL and assigned to a compound master data type
- C. Created as type INTEGER and assigned to a simple master data type
- D. Created as type INTEGER and assigned to a compound master data type
Answer: B
NEW QUESTION # 46
You are setting up planing with lot sizes.What are some of the properties of lot sizes that you need to be aware of?Note: There are 2 correct answers to this question.
- A. Lot sizes are applicable for production and transportation quantities.
- B. Lot sizes are time-independent master data settings.
- C. Lot sizes are applicable for production and handling quantities.
- D. Periodic lot size setting overrides the minimum lot size.
Answer: B,C
NEW QUESTION # 47
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?Note: There are 3 correct answers to this question.
- A. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
- B. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
- C. It checks whether the sourcing in the Production Source Item Master Data type exists.
- D. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- E. It checks whether the required planning level master data exists for a subset of input key figures.
Answer: B,D,E
NEW QUESTION # 48
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?
- A. IF("PERIODID4" ="$$PERIODID4CU$$...)
- B. IF("PERIODID5" ="$$PERIODID5CU$$...)
- C. IF("PERIODID2" ="$$PERIODID2CU$$...)
- D. IF("PERIODID3" ="$$PERIODID3CU$$...)
Answer: A
NEW QUESTION # 49
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Aggregated constraints
- B. Minimum lot size
- C. Transportation lead times
- D. Adjusted transport receipts
- E. Maximum lot size
Answer: B,C,D
NEW QUESTION # 50
You are implementing SAP IBP to plan for a supply chain that experiences high seasonality.What supply planning operators can be used in your model to plan stock pre-builds?
- A. Supply optimizer only
- B. Supply optimizer and supply heuristics
- C. Finite heuristics only
- D. Finite and infinite heuristics
Answer: B
NEW QUESTION # 51
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.
- A. Both periods and profiles are identified by a unique integer.
- B. Periods are identified by an alphanumeric prefix and profiles by an integer.
- C. Both periods and profiles have start and end dates.
- D. Periods are identified by an integer and profiles by an alphanumeric prefix.
Answer: B,D
NEW QUESTION # 52
Which of the following are valid use cases for using the Realignment App?Note: There are 2 correct answers to this question.
- A. Changing customer sources and reassigning customers to new DCs
- B. Removing outliers from the sales history of a reference product before transferring its sales to a new product
- C. Using the realignment run to identify obsolete data
- D. Merging two locations into a new location
Answer: A,D
NEW QUESTION # 53
......
Download Real SAP C-IBP-2211 Exam Dumps Test Engine Exam Questions: https://www.examtorrent.com/C-IBP-2211-valid-vce-dumps.html
Verified C-IBP-2211 Dumps Q&As - C-IBP-2211 Test Engine with Correct Answers: https://drive.google.com/open?id=1kEF5DksY_6DbL2mUJ53hg0so1iGnVee7
