A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100,000 sq ft (9290 sq m). Data centers are all offsite and will be out of scope for this project. The customer is underserved by its existing L2- based network infrastructure and would like to take advantage of modem best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of 'smart office' technology. These improvements will drive blue-dot wayfinding, presence analytics, and other location-based services.
The client decided that they would like to manage two wiring closets as a single stack with a total of 10 switches and a minimum transport speed of 25Gbps over OM4 MM fiber. They would also like to keep the stacking cabling cost to a minimum.
Which stacking components would be required to meet the customer's requirements in the most cost-effective way if the closets were 190 m (620 ft) apart? (Choose two.)

• A. SFP28 transceivers
• B. SFP56 transceivers
• C. 50G DAC cables
• D. 25G DAC cables

XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 4x neighborhood health centers and 125 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced.
XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites by enhancing wired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.
Locations:
- XYZ Regional Hospital Is located In New York City
- Dila Health Center Is located in City A
- Mount Health Center is located In City B
- Rock Health Center is located in City C
- Branch clinics are located at different locations across the United States Requirements:
- Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and service Level performance reporting.
- Seamless integration across wired, wireless. WAN, SD-Branch, loT
- Provide secure wireless access to all the employees of the Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.
- All-access points must support the following features and specifications: 802.11.ax (Wi-Fi 6E Certified)
- Security options Including WP2/WPA3, 80Z.1X with Radius secure authentication
- Identify and authenticate every wireless and wired device
- End-to-end role-based security
- Seamless mobility across the hospital tor medical teams, patients, and visitors
- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site
- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs
- Fully redundant branch solution with dynamic path selection to the hospital XYZ Regional Hospital is looking tor an NAC solution to address its security challenges.
Requirements:
- fully redundant NAC solution for management and authentication
- wireless and wired authentication for the main hospital will be handled locally
- wireless and wired authentication for the health centers will be handled locally
- wireless and wired authentication tor the clinics will be authenticated against the main hospital NAC
- staff ustrs/devices should able to visit any site and haw the same experience
- support 35k devices
Locations:
- XYZ Regional Hospital is located in City 1 - 15k devices
- Dila Health center is located in City 2 - 8k devices
- Mount Health Center is located in City 3 - 5k devices
- Rock Health Center is located in City 4 - 4k devices
-125 branch clinics are located at different locations across the US - 2k devices Which solution meets the customer's requirements?

• A. * 1x 3010 as a Publisher for the main DC
  * 1x 3010 as a Standby Publisher for the DR
  * 2x 3010 as Subscribers for the Main Hospital
  * 2x C1000 as Subscribers for the Dila Health Center
  * 2x VMs as Subscribers for the Mount Health Center
  * 2x C2020 as Subscribers for the Rock Health Center
  * 15k + 10k Access licenses
• B. * 1x 3010 as a Publisher for the main DC
  * 1x 3010 as a Standby Publisher for the DR
  * 2x 3010 as Subscribers for the Main Hospital
  * 2x C2020 as Subscribers for the Dila Health Center
  * 2x C2020 as Subscribers for the Mount Health Center
  * 2x C2020 as Subscribers for the Rock Health Center
  * 25k + 10k Access licenses
• C. * 1x 3010 as a Publisher for the main DC
  * 1x C2020 as a Standby Publisher for the DR
  * 2x C2020 as Subscribers for the Main Hospital
  * 2x C1000 as Subscribers for the Dila Health Center
  * 2x C1000 as Subscribers for the Mount Health Center
  * 2x VMs as Subscribers for the Rock Health Center
  * 15k + 10k Access licenses
• D. * 1x C3010 as a Publisher for the main DC
  * 1x C3010 as a Standby Publisher for the DR
  * 2x C3010 as Subscribers for the Main Hospital
  * 2x C1000 as Subscribers for the Dila Health Center
  * 2x VMs as Subscribers for the Mount Health Center
  * 2x VMs as Subscribers for the Rock Health Center
  * 35k Access licenses

An insurance company is planning to modernize its current Wi-Fi 4 deployment in its downtown office building. At the time, network was designed around a 2.4 GHz radio coverage strategy.
They are targeting a high-throughput, high-density (HD) design to future-proof its investment.
Your team is proposing a new site survey aligned with modern wireless design principles.
The CTO believes the site is prepared for Wi-Fi 6E standard or newer, referencing a previous site survey conducted four years ago. This same site survey confirmed the reuse of current cabling and existing access point installation locations.
Which statement about a 6 GHz design is correct?

• A. A site survey could prove the 6 GHz radios can increase signal strength without concerns of interference with non 802.11 technologies.
• B. The 6 GHz band has a noticeable higher Free-space path loss (FSPL) than 2 4 GHz band.
• C. Since Wi-Fi 4 and Wi-Fi 6E support the 5 GHz band, a site survey would confirm a one to one AP replacement in the same locations.
• D. With limited 6 GHz client support today, a new site survey should be done to focus on 5 GHz for compatibility.

The current IT staff is used to working with legacy OS-S (ProCurve) equipment. They are worried that they cannot handle OS-CX switches due to the different command syntax. What are two ways to make the transition easier for them? (Choose two.)

• A. CLI Bank
• B. create aliases
• C. ASP
• D. CLI Reference Guide for OS-CX, OS-Switch, Comware and Cisco IOS

Drag and Drop Question
Match the deployment type to the estimated number of APs.