300-710 Dumps To Pass CCNP Security Exam in One Day (Updated 145 Questions)
300-710 Exam Brain Dumps - Study Notes and Theory
Requirements
The Cisco 300-710 exam is majorly designed for the professionals who currently perform the role of an Administrator and already have some level of experience with Cisco and its products. There are no formal prerequisites that the candidates should meet to be eligible for this certification test. However, they need to develop certain knowledge and skills to be able to tackle the exam questions. The required competencies include technical comprehension of TCP/IP networking and network architecture; fundamental knowledge of Intrusion Detection Systems (IDS) as well as IPS concepts; awareness of TCP/IP and general routing protocols; understanding of Intrusion Prevention System (IPS), VPN, as well as firewall concepts.
NEW QUESTION 34
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
- A. unknown
- B. disconnected
- C. clean
- D. unavailable
Answer: D
NEW QUESTION 35
Which two deployment types support high availability? (Choose two.)
- A. intra-chassis multi-instance
- B. routed
- C. virtual appliance in public cloud
- D. transparent
- E. clustered
Answer: B,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION 36
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
- A. Child domains cannot view dashboards that originate from an ancestor domain.
- B. Only the administrator of the top ancestor domain can view dashboards.
- C. Child domains have access to only a limited set of widgets from ancestor domains.
- D. Child domains can view but not edit dashboards that originate from an ancestor domain.
Answer: A
NEW QUESTION 37
Which action should be taken after editing an object that is used inside an access control policy?
- A. Create another rule using a different object name.
- B. Redeploy the updated configuration.
- C. Delete the existing object in use.
- D. Refresh the Cisco FMC GUI for the access control policy.
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config- guide-v63/reusable_objects.html
NEW QUESTION 38
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?
- A. show managers
- B. show running-config | include manager
- C. show configuration session
- D. system generate-troubleshoot
Answer: A
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/ b_Command_Reference_for_Firepower_Threat_Defense/c_3.html
NEW QUESTION 39
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator manually updates the policies.
- B. Cisco Firepower gives recommendations to update the policies.
- C. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- D. Cisco Firepower automatically updates the policies.
Answer: B
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION 40
A mid-sized company is experiencing higher network bandwidth utilization due to a recent acquisition The network operations team is asked to scale up their one Cisco FTD appliance deployment to higher capacities due to the increased network bandwidth. Which design option should be used to accomplish this goal?
- A. Deploy multiple Cisco FTD HA pairs in clustering mode to increase performance
- B. Deploy multiple Cisco FTD appliances using VPN load-balancing to scale performance.
- C. Deploy multiple Cisco FTD HA pairs to increase performance
- D. Deploy multiple Cisco FTD appliances in firewall clustering mode to increase performance.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/ftd-cluster-solution.html#concept_C8502505F840451C9E600F1EED9BC18E
NEW QUESTION 41
After using Firepower for some time and learning about how it interacts with the network, an administrator is trying to correlate malicious activity with a user Which widget should be configured to provide this visibility on the Cisco Firepower dashboards?
- A. Custom Analysis
- B. Correlation Events
- C. Current Sessions
- D. Current Status
Answer: A
NEW QUESTION 42
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by bypassing protocol inspection by leveraging pre-filter rules
- B. by leveraging the ARP to direct traffic through the firewall
- C. by using a BVI and create a BVI IP address in the same subnet as the user segment
- D. by assigning an inline set interface
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION 43
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
- A. Maximum Detection
- B. Connectivity Over Security
- C. Balanced Security and Connectivity
- D. Security Over Connectivity
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html
NEW QUESTION 44
Which CLI command is used to generate firewall debug messages on a Cisco Firepower?
- A. system support platform
- B. system support dump-table
- C. system support ssl-debug
- D. system support firewall-engine-debug
Answer: D
NEW QUESTION 45
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?
- A. FlexConfig
- B. IRB
- C. SGT
- D. BDI
Answer: B
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/ Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html
NEW QUESTION 46
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
- B. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
- C. They can block traffic based on Security Intelligence data.
- D. File policies use an associated variable set to perform intrusion prevention.
- E. The system performs intrusion inspection followed by file inspection.
Answer: B,C
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Access_Control_Using_Intrusion_and_File_Policies.html
NEW QUESTION 47
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
- A. Maximum Detection
- B. Connectivity Over Security
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html - C. Balanced Security and Connectivity
- D. Security Over Connectivity
Answer: C
NEW QUESTION 48
An engineer is monitoring network traffic from their sales and product development departments, which are on two separate networks What must be configured in order to maintain data privacy for both departments?
- A. Use a dedicated IPS inline set for each department to maintain traffic separation
- B. Use passive IDS ports for both departments
- C. Use 802 1Q mime set Trunk interfaces with VLANs to maintain logical traffic separation
- D. Use one pair of inline set in TAP mode for both departments
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/ inline_sets_and_passive_interfaces_for_firepower_threat_defense.html
NEW QUESTION 49
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)
- A. The Cisco FMC web interface prompts users to re-apply access control policies.
- B. No option to delete and re-add a device is available in the Cisco FMC web interface.
- C. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
- D. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.
- E. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re- apply the policies after registration is completed.
Answer: A,D
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Device_Management_Basics.html
NEW QUESTION 50
With Cisco FTD software, which interface mode must be configured to passively receive traffic that passes through the appliance?
- A. IPS-only
- B. firewall
- C. tap
- D. ERSPAN
Answer: D
Explanation:
Reference:
v64/interface_overview_for_firepower_threat_defense.html
NEW QUESTION 51
......
Knowing the Associated Certifications
Cisco 300-710 is the gold standard of security tests and allows candidates to reap multiple benefits. As far as the associated certification is concerned, success in this exam leads to obtaining two of them. The first one is CCNP Security. It is a professional-level certificate helping any individual to prove their skills in fabricating real-time security solutions. To earn it, candidates have to first ace 350-701 test and then aim at Cisco 300-710 as this is a viable concentration exam choice.
When 300-710 is passed alone, it will lead to acquiring the Cisco Certified Specialist – Network Security Firepower accreditation. It is an intermediate certificate trying to impart established learning related to Cisco Firepower 7000 and 8000 series as well as Firepower Threat Defense.
300-710 Dumps PDF - Want To Pass 300-710 Fast: https://www.examtorrent.com/300-710-valid-vce-dumps.html
100% Guaranteed Results 300-710 Unlimited 145 Questions: https://drive.google.com/open?id=1X_Q945jXn9uo499UqWCNVcXA67aSzARv
