Buy Latest Nov 30, 2021 300-710 Exam Q&A PDF - One Year Free Update
Download the Latest 300-710 Dump - 2021 300-710 Exam Questions
Asked Prerequisites
Officially, there are no mandatory requirements to fulfill before taking up the Cisco 300-710 exam. Anyone can go for it and excel at the career front. But, the preparation process is not as easy as it may sound. So, it is wise to gain adequate industry exposure, saying about three to five years, before appearing for this test. Such a prior understanding will make the exam journey more simplified and effortless.
NEW QUESTION 50
Which Cisco Firepower rule action displays an HTTP warning page?
- A. Monitor
- B. Allow with Warning
- C. Interactive Block
- D. Block
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System- UserGuide-v5401/AC-Rules-Tuning-Overview.html#76698
NEW QUESTION 51
An engineer is configuring a second Cisco FMC as a standby device but is unable to register with the active unit. What is causing this issue?
- A. The primary FMC currently has devices connected to it.
- B. There is only 10 Mbps of bandwidth between the two devices.
- C. The licensing purchased does not include high availability
- D. The code versions running on the Cisco FMC devices are different
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_management_center_high_availability.html
NEW QUESTION 52
Which group within Cisco does the Threat Response team use for threat analysis and research?
- A. Cisco Talos
- B. OpenDNS Group
- C. Cisco Network Response
- D. Cisco Deep Analytics
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/products/security/threat-response.html#~benefits
NEW QUESTION 53
An organization wants to secure traffic from their branch office to the headquarter building using Cisco Firepower devices, They want to ensure that their Cisco Firepower devices are not wasting resources on inspecting the VPN traffic. What must be done to meet these requirements?
- A. Configure the Cisco Firepower devices to bypass the access control policies for VPN traffic.
- B. Enable a flexconfig policy to re-classify VPN traffic so that it no longer appears as interesting traffic
- C. Configure the Cisco Firepower devices to ignore the VPN traffic using prefilter policies
- D. Tune the intrusion policies in order to allow the VPN traffic through without inspection
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/fdm/fptd-fdm-config-guide-640/fptd-fdm-ravpn.html
NEW QUESTION 54
Which action should be taken after editing an object that is used inside an access control policy?
- A. Create another rule using a different object name.
- B. Redeploy the updated configuration.
- C. Delete the existing object in use.
- D. Refresh the Cisco FMC GUI for the access control policy.
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/630/configuration/guide/fpmc-config- guide-v63/reusable_objects.html
NEW QUESTION 55
What are the minimum requirements to deploy a managed device inline?
- A. passive interface, MTU, and mode
- B. inline interfaces, MTU, and mode
- C. inline interfaces, security zones, MTU, and mode
- D. passive interface, security zone, MTU, and mode
Answer: B
NEW QUESTION 56
A connectivity issue is occurring between a client and a server which are communicating through a Cisco Firepower device While troubleshooting, a network administrator sees that traffic is reaching the server, but the client is not getting a response Which step must be taken to resolve this issue without initiating traffic from the client?
- A. Use packet capture to ensure that traffic is not being blocked by an access list.
- B. Use packet-tracer to validate that the packet passes through the firewall and is NATed to the corrected IP address.
- C. Use packet capture to validate that the packet passes through the firewall and is NATed to the corrected IP address.
- D. Use packet-tracer to ensure that traffic is not being blocked by an access list.
Answer: B
NEW QUESTION 57
Which Cisco Firepower rule action displays an HTTP warning page?
- A. Monitor
- B. Allow with Warning
- C. Interactive Block
- D. Block
Answer: C
NEW QUESTION 58
Which action should be taken after editing an object that is used inside an access control policy?
- A. Create another rule using a different object name.
- B. Redeploy the updated configuration.
- C. Delete the existing object in use.
- D. Refresh the Cisco FMC GUI for the access control policy.
Answer: B
NEW QUESTION 59
Which report template field format is available in Cisco FMC?
- A. bar chart
- B. arrow chart
- C. box lever chart
- D. benchmark chart
Answer: A
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Working_with_Reports.html
NEW QUESTION 60
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
- A. transparent inline mode
- B. propagate link state
- C. strict TCP enforcement
- D. TAP mode
Answer: B
Explanation:
Section: Deployment
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config- guide-v64/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html
NEW QUESTION 61
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
- A. configure coredump packet-engine enable
- B. capture-traffic
- C. capture
- D. capture WORD
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/b_Command_Reference_for_Firepower_Threat_Defense/ac_1.html
NEW QUESTION 62
A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface What must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?
- A. Only the UDP packet type is supported
- B. The VLAN ID and destination MAC address are optional
- C. The destination MAC address is optional if a VLAN ID value is entered
- D. The output format option for the packet logs unavailable
Answer: C
NEW QUESTION 63
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
- A. Child domains cannot view dashboards that originate from an ancestor domain.
- B. Only the administrator of the top ancestor domain can view dashboards.
- C. Child domains have access to only a limited set of widgets from ancestor domains.
- D. Child domains can view but not edit dashboards that originate from an ancestor domain.
Answer: A
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Using_Dashboards.html
NEW QUESTION 64
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)
- A. The units must be the same model.
- B. The units must be different models if they are part of the same series.
- C. The units must be configured only for firewall routed mode.
- D. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
- E. The units must be the same version
Answer: A,E
NEW QUESTION 65
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by bypassing protocol inspection by leveraging pre-filter rules
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html - B. by leveraging the ARP to direct traffic through the firewall
- C. by using a BVI and create a BVI IP address in the same subnet as the user segment
- D. by assigning an inline set interface
Answer: C
NEW QUESTION 66
In which two places are thresholding settings configured? (Choose two.)
- A. globally, per intrusion policy
- B. per preprocessor, within the network analysis policy
- C. globally, within the network analysis policy
- D. on each IPS rule
- E. on each access control rule
Answer: A,D
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-Global-Threshold.pdf
NEW QUESTION 67
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION 68
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by bypassing protocol inspection by leveraging pre-filter rules
- B. by leveraging the ARP to direct traffic through the firewall
- C. by using a BVI and create a BVI IP address in the same subnet as the user segment
- D. by assigning an inline set interface
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION 69
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high- availability?
- A. configure high-availability resume
- B. system support network-options
- C. configure high-availability disable
- D. configure high-availability suspend
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION 70
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?
- A. /etc/sf/DCEALERT.MIB
- B. /sf/etc/DCEALERT.MIB
- C. /etc/sf/DCMIB.ALERT
- D. system/etc/DCEALERT.MIB
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-External-Responses.pdf
NEW QUESTION 71
......
Cisco 300-710 Exam Certification Details:
| Number of Questions | 55-65 |
| Exam Code | 300-710 SNCF |
| Recommended Training | Securing Networks with Cisco Firepower Next Generation Firewall (SSNGFW) Securing Networks with Cisco Firepower Next-Generation IPS (SSFIPS) |
| Exam Registration | PEARSON VUE |
| Exam Name | Securing Networks with Cisco Firepower |
| Duration | 90 minutes |
| Exam Price | $300 USD |
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Sample Questions | Cisco 300-710 Sample Questions |
Getting Exam Ready
Cisco 300-710 serves multiple purposes. Hence, it takes a lot to gain competency in its content and achieve passing grades. This will be accomplished effortlessly only if the aspirant has access to quality study resources.
The vendor offers two training courses to impart an in-depth understanding of the topics. The first option is SSNGFW v1.0 or Securing Networks with Cisco Firepower Next Generation Firewall. This is a five-day-long guided or self-paced training that helps one to gain all the needed information regarding security of networks and using Cisco Firepower Next-Gen Firewall via blended methodology. It has a combination of lectures and lab sessions to teach the crux of the matter.
The second option is Securing Networks with Cisco Firepower Next-Generation Intrusion Prevention System (SSFIPS) v4.0. This too is a 5-day course designed to infuse an in-depth understanding of the Cisco Firepower® Next-Gen IPS (NGIPS). It also explains the exam content with the help of lectures and lab sessions.
However, additional self-study is a crucial aspect of exam preparation. One can’t taste success in the Cisco 300-710 test without it. For such materials, Amazon is surely an ideal choice. There, one can access quality books like “CCIE/CCNP Security SNCF 300-710” by Todd Lammle and “How I Passed Securing 300-710 SNCF Exam: Successfully Proven Tips” by Rocismo Liolentz Publications. The first option explains the exam topics in a structured manner and acts as a reliable study resource. The second one is a valuable tool for learning more about test-taking tips and understanding how to build the preparation process effectively.
Verified 300-710 Dumps Q&As - 1 Year Free & Quickly Updates: https://www.examtorrent.com/300-710-valid-vce-dumps.html
Latest Cisco 300-710 Certification Practice Test Questions: https://drive.google.com/open?id=1BFk2fgPEjtq0tgmlOcaAtuO5u-PMZfv5
