Cisco 300-810 Exam Info and Free Practice Test | ExamTorrent
Pass Cisco 300-810 Premium Files Test Engine pdf - Free Dumps Collection
Difficulty in Writing Implementing Cisco Collaboration Applications (300-810) Exam
There could be many challenges participants can encounter during exam or before exam, some of the possibility could be like they haven't done preparation properly, they might have not gone through the course contents properly, might be didn't got desired date for exam because of the lack of the availability of the respective date, might be exam center which they are looking would be quite far from their place. Apart from all these challenges, when participants start writing exam, as this is computer based online exam, so sometime you may find tough in reading all the questions because exam questions could be lengthy enough which would be going on next page and you would be required to move your screen here and there. Participants may get nervous because of the complexity of the questions and confusing answers option. Challenges related to exam prepration atleast you can overcome by refering exam dumps provided by the ExamTorrent. ExamTorrent is sure about the exactness and legitimacy of 300-810 : Implementing Cisco Collaboration Applications exam dumps because it's been prepared by the Cisco Certified experts. Candidates can easily pass the 300-810 : Implementing Cisco Collaboration Applications exam with genuine 300-810 Dumps and get Cisco certification. The best source to understand the 300-810 : Implementing Cisco Collaboration Applications exam dumps well by simply pursuing examples questions and answers which is there on our website. If candidate completely practice the exam with certification 300-810 : Implementing Cisco Collaboration Applications exam dumps definitely they would able to crack this exam.
NEW QUESTION 25
Refer to the exhibit.
A Jabber user is unable to access voicemail. During troubleshooting, an administrator captures this screenshot. What are the two ways to resolve this issue? (Choose two.)
- A. Ask the user to click on the Connect to a device" button and use the correct username and password.
- B. Ask an administrator to create an account for this user in Cisco Unity Connection but remove the Unity Connection UC service from the Cisco UCM Jabber service profile.
- C. Make sure the Jabber service profile created in Cisco UCM contains Unity Connection UC service with a voicemail server configured.
- D. Ensure the user is not locally created on Cisco Unity Connection with a password expiring separately from the password that is used for Jabber.
Answer: A,D
Explanation:
Check if "OAuth with Refresh Login Flow" is enabled on Cisco Unity Connection but disabled in Cisco UCM.
NEW QUESTION 26
Drag and drop the steps of the SAML SSO process from the left into the order on the right.
Answer:
Explanation:
NEW QUESTION 27
An engineer is working on a cisco unity Express system and notices that users that exist on the integrated cisco UCME are missing from Cisco Unity Express. Which two actions using the GUI resolve this discrepancy? (Choose two)
- A. Use the Synchronize Information under Administration
- B. Use the Synchronize task under the User ID field.
- C. Import the users using a CSV file.
- D. Add the missing users manually to Cisco Unity Express
- E. Use the Synchronize System under MWI
Answer: D,E
NEW QUESTION 28
Refer to the exhibit.
Calls that are not answered by the user are for the location. If the user at extension 11112222 does not have a voice mailbox, which rule is utilized when Cisco Unity Communication receives the forwarded call?
- A. Arizona_AA
- B. Opening_Greeting
- C. Attempt Sign In
- D. NewYork_AA
Answer: A
NEW QUESTION 29
To redirect calls from the phone extension for user A to the voicemail greeting, which call routing rule should be used in Cisco Unity Connection?
- A. Attempt Forward forwarded routing rule
- B. Attempt Sign-In direct routing rule
- C. Opening Greeting direct routing rule
- D. Opening Greeting forwarded routing rule
Answer: A
Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/unity-connection-call-routing-logic/ta- p/3162560
NEW QUESTION 30
When Cisco IM and Presence is configured to use automatic fallback, how long does the Server Recovery Manager service wait for a failed service/server to remain active before an automatic fallback is initiated?
- A. 10 minutes
- B. 1 hour
- C. 20 minutes
- D. 30 minutes
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-im-presence-service/200958-IM-and-Presence-Server-High-Availability.html
NEW QUESTION 31
Refer to the exhibit.
The associated directory number is configured with Call Forward All to voicemail in Cisco UCM. When users call the directory number they hear the opening greeting. Which action should be taken to correct this issue?
- A. Modify the rule to a Forward Routing Rule.
- B. Modify the Calling Number to 3005.
- C. Modify the Call Forward All to the voicemail pilot.
- D. Modify the Dialed Number condition from "Equals" to "In".
Answer: A
NEW QUESTION 32
Drag and drop the steps of the SAML SSO process from the left into the order on the right.
Answer:
Explanation:
NEW QUESTION 33
Refer to the exhibit.
Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?
- A. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
- B. The port specified on the SRV record is wrong.
- C. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
- D. The domain ccnp.cisco.com does not exist on the DNS server.
Answer: D
Explanation:
Explanation/Reference: https://community.cisco.com/t5/collaboration-voice-and-video/jabber-client-login-and-login-issues/ ta-p/3143446
NEW QUESTION 34
Drag and drop the steps from the left into the correct order on the right that describes the flow of presence updates when a user manually sets the presence status in Cisco Jabber. Not all options are used.
Answer:
Explanation:
Explanation
Step 1 - A
Step 2 - B
Step 3 - D
NEW QUESTION 35
Drag and drop the events for an on-premises Jabber SAML SSO flow from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 36
Drag and drop the SAML components from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION 37
Refer to the exhibit.
User A tries to log in to the Cisco Jabber client, the login works fine, but the user cannot see their self-presence or other users' presence in their contact list. The administrator checks the Cisco IM and Presence Server logs and sees an issue. What is the issue, and bow does It get resolved?
- A. The Cisco IM and Presence Server has CPU/memory issues; restart the IM and Presence Server.
- B. The user is duplicated in another Cisco IM and Presence cluster; unassign the user from the duplicate IM and Presence cluster.
- C. Presence has stopped working for the user; unassign and reassign the end-user to Cisco IM and Presence.
- D. The user credentials are incorrect; ask the user to change the credentials.
Answer: B
NEW QUESTION 38
Drag and drop the events for an on-premises Jabber SAML SSO flow from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 39
Drag and drop the SAML components from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION 40
Drag and drop the steps for SAML SSO authentication from the left into the order on the right.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/SAML_SSO_deployment_guide/12_5_1/cucm_b_saml-sso-deployment-guide-12_5/cucm_b_saml-sso-deployment-guide-12_5_chapter_01.html
NEW QUESTION 41
Drag and drop the steps from the left into the correct order on the right that describes the flow of presence updates when a user manually sets the presence status in Cisco Jabber. Not all options are used.
Answer:
Explanation:
NEW QUESTION 42
Drag and drop the steps for SAML SSO authentication from the left into the order on the right.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/SAML_SSO_deployment_guide/12_5_1/cucm_b_saml-sso-deployment-guide-12_5/cucm_b_saml-sso-deployment-guide-12_5_chapter_01.html
NEW QUESTION 43
Refer to the exhibit.
After configuration of the Cisco IM&P cluster in high-availability mode, both IM&P servers remain in the initializing state. Which two actions ensure normal operations of this IM&P high-availability cluster? (Choose two.)
- A. Confirm that Cisco Presence Engine, Cisco XCP Router, and Cisco DB services are up and running on both IM&P servers.
- B. Verify that the Cisco XCP SIP Federation Connection Manager service is running.
- C. Clear the Enable High Availability check box in the Presence Redundancy Group configuration.
- D. Restart the Server Recovery Manager service in Cisco Unified Serviceability - Network Services on both IM&P servers.
- E. Ensure that an equal number of users are assigned to each IM&P server.
Answer: D,E
NEW QUESTION 44
......
Updated Official licence for 300-810 Certified by 300-810 Dumps PDF: https://www.examtorrent.com/300-810-valid-vce-dumps.html
New 2022 Realistic 300-810 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=1HtDnOT8hGitNhf3jnQqCtp8ltdcYlofc
