Guaranteed Success in CCNP Collaboration 300-810 Exam Dumps
Cisco 300-810 Daily Practice Exam New 2024 Updated 185 Questions
To prepare for the Cisco 300-810 exam, candidates should have a solid understanding of Cisco collaboration technologies, networking concepts, and protocols. They should also have hands-on experience in deploying and configuring Cisco collaboration applications. Cisco offers various training resources, including instructor-led courses, e-learning modules, and practice exams, to help candidates prepare for the exam.
NEW QUESTION # 35
A collaboration engineer wants to stop fraudulent calls to the PSTN that are being made through Cisco Unity Connection Cisco Unity Connection is integrated with Cisco UCM via the SCCP protocol Which action accomplishes this goal?
- A. Remove values from the restriction table
- B. Change the configuration of the routing rule
- C. Change the Rerouting CSS on the trunk to Cisco Unity Connection
- D. Change the CSS of the voicemail port
Answer: D
NEW QUESTION # 36
An engineer is configuring a customer's environment for Jabber user over mobile and remote access. The customer's internal domain. Which Jabber parameter defines the external service discovery domain statistically?
- A. exclude services
- B. services domain
- C. voice services domain
- D. UPN discovery enabled
Answer: A
NEW QUESTION # 37
Refer to the exhibit.
Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?
- A. The domain ccnp.cisco.com does not exist on the DNS server.
- B. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
- C. The port specified on the SRV record is wrong.
- D. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
Answer: C
Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/jabber-client-login-and-login-issues/ ta-p/3143446
NEW QUESTION # 38
Drag and drop the steps from the left into the correct order on the right that describes the flow of presence updates when a user manually sets the presence status in Cisco Jabber. Not all options are used.
Answer:
Explanation:
Step 1 - A
Step 2 - B
Step 3 - D
NEW QUESTION # 39
Refer to the exhibit.
Which action allows a remote Cisco Jabber user utilizing Mobile and Remote Access to automatically log in to a Cisco Unity Connection voicemail box via OAuth?
- A. Add CUCM under System Settings > Authz Servers in Cisco Unity Connection.
- B. Add CUCM under System Settings > Authz Servers in Cisco Expressway-C.
- C. Add CUCM under System Settings > Authz Servers in Cisco Expressway-E.
- D. Add CUCM under System Settings > Authz Servers in Cisco Unity.
Answer: A
Explanation:
Reference:
https://community.cisco.com/t5/unified-communications/jabber-mra-unity-voice-mail-integration- issue/td-p/3195653
NEW QUESTION # 40
Which two command line arguments can you specify when installing Cisco Jabber for windows? (Choose two.)
- A. TFTP_ADDRESS
- B. SERVICES_DOMAIN
- C. VOICEMAIL_SERVER_ADDRESS
- D. TFTP
- E. CISCO_UDS_DOMAIN
Answer: B,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/ CJAB_BK_D657A25F_00_deployment-installation-guide-jabber-110/CJAB_BK_D657A25F_00_deployment- installation-guide-jabber-110_chapter_01100.html#JABW_RF_CE43EF4C_00
NEW QUESTION # 41
A collaboration engineer is troubleshooting MWl issues with Cisco Unity Connection and Cisco UCM. Users report that MWl lights do not work when a new message is received. After doing a packet capture, the engineer notices that Unity Connection sends a SIP Notify to Cisco UCM for MWI.Cisco UCM responds with a SIP 503 Service Unavailable message. Which action resolves the issue?
- A. Uncheck"Send Message Counts" on the phone system settings on Cisco Unity Connection.
- B. Assign the proper voicemail profile to the directory numbers on Cisco UCM.
- C. Configure the SIP server list on the Cisco Unity Connection port group to match the Cisco UCM device pool settings on the SIP trunk.
- D. Uncheck"Accept unsolicited notifications" on the SIP trunk security profile.
Answer: C
Explanation:
Explanation
This option is the correct action to resolve the issue of MWI not working when a new message is received. The SIP server list on the Cisco Unity Connection port group defines the destination addresses for SIP messages, such as MWI notifications, that Unity Connection sends to Cisco UCM. If the SIP server list does not match the device pool settings on the SIP trunk, Cisco UCM may not be able to route the MWI notifications to the correct devices, and may respond with a SIP 503 Service Unavailable message. References:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/integration/guide/cucm_sip/cucint
https://www.cisco.com/c/en/us/support/docs/unified-communications/unity-connection/200453-Configure-
NEW QUESTION # 42
Refer to the exhibit.
After configuration of the Cisco IM&P cluster in high-availability mode, both IM&P servers remain in the initializing state. Which two actions ensure normal operations of this IM&P high-availability cluster? (Choose two.)
- A. Ensure that an equal number of users are assigned to each IM&P server.
- B. Confirm that Cisco Presence Engine, Cisco XCP Router, and Cisco DB services are up and running on both IM&P servers.
- C. Verify that the Cisco XCP SIP Federation Connection Manager service is running.
- D. Clear the Enable High Availability check box in the Presence Redundancy Group configuration.
- E. Restart the Server Recovery Manager service in Cisco Unified Serviceability - Network Services on both IM&P servers.
Answer: A,E
NEW QUESTION # 43
To redirect calls from the phone extension for user A to the voicemail greeting, which call routing rule should be used in Cisco Unity Connection?
- A. Opening Greeting direct routing rule
- B. Attempt Forward forwarded routing rule
- C. Opening Greeting forwarded routing rule
- D. Attempt Sign-In direct routing rule
Answer: B
NEW QUESTION # 44
The persistent chat feature is configured in a Cisco Jabber deployment that is running Cisco Unified IM and Presence 11.5 SU6. Desktop clients are working, but mobile clients are not displaying persistent chats. Which configuration is necessary to enable the Jabber persistent chat feature on mobile devices?
- A. add "Enable_Persistent_Chat" in the "Cisco Support Field" on the Jabber for mobile device configuration page on Cisco UCM
- B. add the <Persistent_Chat_Mobile_Enabled>false</Persistent_Chat_Mobile_Enabled> line to the Jabber configuration file that is used by all Jabber devices
- C. while logged into IM and Presence server Administration, go to "Messaging", then "Settings", and check the checkbox for the "Enable persistent chat for mobile" field
- D. add the <Persistent_Chat_Enabled>true</Persistent_Chat_Enabled> line to the Jabber configuration file that is used by mobile devices
Answer: B
NEW QUESTION # 45
A collaboration engineer is troubleshooting Cisco IM and Presence high availability. The system is version
10.x. The engineer has confirneed that the server recovery manager service is configured using system defaults.
The engineer notices that user sessions have not fallen back to the homed nodes. What is the cause this Issue?
- A. The user accounts were moved to the redundant server,
- B. The engineer did not click the Fallback button for the redundancy group
- C. The failed service Of server was offline longer than the Client Re-Login upper Lint setting.
- D. The failed service or server has not been active for at least 30 minutes.
Answer: C
Explanation:
Explanation
This option explains why the user sessions have not fallen back to the homed nodes after the failed service or server was restored. The Client Re-Login upper limit setting determines how long the Jabber clients will attempt to re-login to their homed nodes after a failover event. If the failed service or server is offline longer than this setting, the Jabber clients will stop trying to re-login and will remain on the backup node until the administrator manually initiates a fallback or recovery. The default value for this setting is 30 minutes, but it can be changed in the Server Recovery Manager Service Parameters. References:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-im
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/11_5_1/cu
NEW QUESTION # 46
Refer to the exhibit.
Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?
- A. The domain ccnp.cisco.com does not exist on the DNS server.
- B. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
- C. The port specified on the SRV record is wrong.
- D. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
Answer: C
NEW QUESTION # 47
A Cisco Unified IM and Presence version 11 .5.1 on-premises deployment of instant messaging with a capacity of 50.000 users includes the multiple device messaging feature. Each of the 30,000 users has 3 Jabber clients. The customer reports that messages are not being received on all 3 clients. What should the administrator do to resolve this issue?
- A. Increase capacity to 60.000 users to service all Jabber clients.
- B. Increase capacity to 90.000 + to match the number of Jabber clients.
- C. Increase capacity to 30.000 users to match the number of Jabber clients.
- D. Increase capacity to 72.000 users to service all Jabber clients.
Answer: B
NEW QUESTION # 48
Refer to the exhibit.
Which two steps resolve the "Users with Duplicate User IDs" message? (Choose two.)
- A. Rename the directory URI value for one of the users to ensure that there is no duplication.
- B. Rename the User ID value for one user if different users on different clusters have the same User ID assigned.
- C. Delete the user ID for the duplicate user ID.
- D. Unassign a user from one of the clusters when the same user is assigned to two different clusters.
- E. Assign the duplicate user to the secondary Cisco IM and Presence node.
Answer: B,D
NEW QUESTION # 49
The calendaring integration on the Cisco IM and Presence server has not been functioning, which results in the
"in a meeting" status not working in Cisco Jabber. Which service log should the engineer use to troubleshoot this issue?
- A. Cisco Presence Engine
- B. Cisco Jabber Problem Report
- C. Cisco SIP Proxy
- D. Cisco XCP Connection Manager
Answer: B
NEW QUESTION # 50
Refer to the exhibit.
A collaboration engineer has integrated Cisco Unity Express with Cisco Unified Communications Manager Express and is experimenting with the MWI feature. With the current configuration, no MWI change occurs when leaving new messages or after playing new messages. Which two changes are needed to correct the configuration? (Choose two.)
- A. ccn subsystem sip
mwi envelop-info - B. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport udp unsolicited - C. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.254 expires 3600 port 5060 transport udp - D. ccn subsystem sip
mwi sub-notify - E. ccn subsystem sip
mwi sip outcall - F. sip-ua
no mwi-server
mwi-server ipv4:172.16.1.253 expires 3600 port 5060 transport tcp notify
Answer: A,C
NEW QUESTION # 51
Refer to the exhibit.
Calls that are not answered by the user are for the location. If the user at extension 11112222 does not have a voice mailbox, which rule is utilized when Cisco Unity Communication receives the forwarded call?
- A. Attempt Sign In
- B. NewYork_AA
- C. Opening_Greeting
- D. Arizona_AA
Answer: D
NEW QUESTION # 52
Refer to the exhibit.
Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?
- A. Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy.
- B. Presentation of the certificates can be disabled by setting up Cisco IM and Presence servers into nonsecure mode.
- C. These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores.
- D. The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/116637- trouble-jabber-00.html
NEW QUESTION # 53
Which entity is a standard component used for authentication by SAML 2.0?
- A. identity provider
- B. session broker
- C. client access server
- D. Internet service provider
Answer: A
NEW QUESTION # 54
An engineer must configure Microsoft Office 365 calendar integration with Cisco IM and Presence The engineer has already configured the presence gateway Drag and drop the remaining configuration steps from the left into the correct order on the right to complete the configuration
Answer:
Explanation:
Explanation
C, D, A, B
NEW QUESTION # 55
Drag and drop the SAML components from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 56
......
To earn the Cisco 300-810 certification, candidates must pass the 90-minute exam that consists of 60-70 questions. 300-810 exam is designed to test the candidate's knowledge of various topics, including configuring Cisco Unity Connection, configuring Cisco IM and Presence, configuring Cisco Webex Teams, integrating Cisco Collaboration Applications with other applications, and troubleshooting Cisco Collaboration Applications. Implementing Cisco Collaboration Applications certification is intended for IT professionals who are interested in advancing their career in the field of Cisco Collaboration Applications and wish to validate their skills and knowledge in this area.
Test Engine to Practice 300-810 Test Questions: https://www.examtorrent.com/300-810-valid-vce-dumps.html
Use Valid 300-810 Exam - Actual Exam Question & Answer: https://drive.google.com/open?id=1kh-9djMHa_pov07ewZgUARYYklcJPOte
