Download Cisco 200-301 Exam Dumps to Pass Exam Easily in 2024
Get 100% Real Free CCNA 200-301 Sample Questions
Cisco 200-301 exam is a comprehensive exam that tests candidates on their theoretical knowledge as well as their practical skills. 200-301 exam consists of multiple-choice questions, simlets, testlets, and simulations. 200-301 exam is also timed and candidates have a limited amount of time to complete the exam. The passing score for the Cisco 200-301 exam is 825 out of 1000.
NEW QUESTION # 158
Which two options are the best reasons to use an IPV4 private IP space? (Choose two.)
- A. to enable intra-enterprise communication
- B. to conserve global address space
- C. to connect applications
- D. to manage routing overhead
- E. to implement NAT
Answer: A,B
Explanation:
Section: Network Fundamentals
NEW QUESTION # 159
Refer to the exhibit. A network engineer must configured communication between PC A and the File Server. To prevent interruption for any other communications, which command must be configured?
- A. Switch trunk allowed vlan 12
- B. Switchport trunk allowed vlan remove 10-11
- C. Switchport trunk allowed vlan add 13
- D. Switchport trunk allowed vlan none
Answer: C
Explanation:
The switchport trunk allowed vlan command is used to specify the list of VLANs that are allowed on a trunk port. When a Layer 2 interface on a Cisco IOS device is configured to operate in trunk mode, the default setting is for the interface to carry all of the VLANs defined on the switch.
NEW QUESTION # 160
Which value is used to determine the active router in an HSRP default configuration?
- A. Router tracking number
- B. Router priority
- C. Router IP address
- D. Router loopback address
Answer: C
Explanation:
Q. If there is no priority configured for a standby group, what determines which router is active?
A. The priority field is used to elect the active router and the standby router for the specific group. In the case of an equal priority, the router with the highest IP address for the respective group is elected as active. Furthermore, if there are more than two routers in the group, the second highest IP address determines the standby router and the other router/routers are in the listen state.
NEW QUESTION # 161
A client experiences slow throughput from a server that is directly connected to the core switch in a data center. A network engineer finds minimal latency on connections to the server, but data transfers are unreliable, and the output of the show interfaces counters errors command shows a high FCS-Err count on the interface that is connected to the server.
What is the cause of the throughput issue?
- A. a cable that is too long
- B. a speed mismatch
- C. a physical cable fault
- D. high bandwidth usage
Answer: C
NEW QUESTION # 162
Drag and drop the HTTP methods used with REST-Based APIs from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 163
Drag and drop the network protocols from the left onto the correct transport services on the right.
Answer:
Explanation:
NEW QUESTION # 164
Refer to the Exhibit.
After the switch configuration the ping test fails between PC A and PC B Based on the output for switch 1.
which error must be corrected?
- A. There is a native VLAN mismatch
- B. All VLANs are not enabled on the trunk
- C. The PCs are m the incorrect VLAN
- D. Access mode is configured on the switch ports.
Answer: A
NEW QUESTION # 165
Drag the descriptions of device management from the left onto the types of device management on the right.
Answer:
Explanation:
Explanation
Cisco DNA Center Device Management
3. Monitor the cloud for software update
5. Uses CLI templates to apply a consistent configuration to multiple devices at an individual location
6. Uses NetFlow to analyse potential security threats throughout the network and take appropriate action on that traffic Traditional device management
2. Manages device configuration on a per-device basis
4. Security is managed near the perimeter of the network with firewalls, VPNs, and IPS
* Implements changes via an SSH terminal
NEW QUESTION # 166
Which three statements about MAC addresses are correct? (Choose three)
- A. To communicate with other devices on a network, a network device must have a unique MAC address
- B. The MAC address is also referred to as the IP address
- C. A MAC address contains two main components, the first of which identifies the network on which the host resides and the second of which uniquely identifies the host on the network
- D. A MAC address contains two main components, the first of which identifies the manufacturer of the hardware and the second of which uniquely identifies the hardware
- E. The MAC address of a device must be configured in the Cisco IOS CLI by a user with administrative privileges
- F. An example of a MAC address is 0A:26:B8:D6:65:90
Answer: A,D,F
NEW QUESTION # 167
How do traditional campus device management and Cisco DNA Center device management differ in regards to deployment?
- A. Traditional campus device management allows a network to scale more quickly than with Cisco DNA Center device management.
- B. Cisco DNA Center device management can be implemented at a lower cost than most traditional campus device management options.
- C. Cisco DNA Center device management can deploy a network more quickly than traditional campus device management.
- D. Traditional campus device management schemes can typically deploy patches and updates more quickly than Cisco DNA Center device management.
Answer: C
Explanation:
Section: Automation and Programmability
NEW QUESTION # 168
Which effete does the aaa new-model configuration command have?
- A. It enables AAA services on the device.
- B. It configures a local user on the device.
- C. It associates a RADIUS server to the group.
- D. It configures the device to connect to a RADIUS server for AAA.
Answer: A
Explanation:
Section: Security Fundamentals
NEW QUESTION # 169
Refer to the Exhibit.
After the switch configuration the ping test fails between PC A and PC B Based on the output for switch 1. which error must be corrected?
- A. There is a native VLAN mismatch
- B. All VLANs are not enabled on the trunk
- C. The PCs are m the incorrect VLAN
- D. Access mode is configured on the switch ports.
Answer: A
NEW QUESTION # 170
Refer to the exhibit. Which two commands must be added to update the configuration of router R1 so that it accepts only encrypted connections? (Choose two)
- A. ip ssh version 2
- B. transport input ssh
- C. crypto key generate rsa 1024
- D. username CNAC secret R!41!4319115@
- E. line vty 0 4
Answer: B,C
NEW QUESTION # 171
Which IPv6 address type provides communication between subnets and cannot route on the Internet?
- A. link-local
- B. global unicast
- C. multicast
- D. unique local
Answer: D
Explanation:
Explanation
A IPv6 Unique Local Address is an IPv6 address in the block FC00::/7. It is the approximate IPv6 counterpart of the IPv4 private address. It is not routable on the global Internet.Note: In the past, Site-local addresses (FEC0::/10) are equivalent to private IP addresses in IPv4 but now they are deprecated.Link-local addresses only used for communications within the local subnet. It is usually created dynamically using a link-local prefix of FE80::/10 and a 64-bit interface identifier (based on 48-bit MAC address).
NEW QUESTION # 172
Refer to the exhibit.
An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.
Answer:
Explanation:
NEW QUESTION # 173
What 8-bit field exists in IP packet for QoS?
- A. Tos Field
- B. Cos
- C. IP Precedence
- D. DSCP
Answer: A
NEW QUESTION # 174
Drag and Drop Question
Refer to the exhibit. Drag and drop the networking parameters from the left on to the correct values on the right.
Select and Place:
Answer:
Explanation:
NEW QUESTION # 175
Refer to the exhibit.
When router R1 is sending traffic to IP address 10.56.192 1, which interface or next hop address does it use to route the packet?
- A. Vlan57
- B. 10.56.128.19
- C. 0.0.0.0.0/0
- D. 10.56.0.1
Answer: D
NEW QUESTION # 176
Refer to the exhibit. After the configuration is applied, the two routers fail to establish an OSPF neighbor relationship. what is the reason for the problem?
- A. The OSPF process IDs are mismatched.
- B. The OSPF router IDs are mismatched.
- C. Router2 is using the default hello timer.
- D. The network statement on Router1 is misconfigured.
Answer: C
Explanation:
Ospf processes can differ on each router and neighborship will form Ospf area must be the same to form adjacency Hello and dead timers must match to form adjacency.
Ospf Default hello timer is 10 and dead timer is 40.
In This case R1 hello timer was modified to 5 seconds, Timers was not changed on R2 hence using the default timers.
NEW QUESTION # 177
Refer to Exhibit.
The loopback1 interface of the Atlanta router must reach the loopback3 interface of the Washington router. Which two static host routes must be configured on the NEW York router? (Choose two)
- A. ipv6 route 2000::3/128 2023::3
- B. ipv6 route 2000::1/128 s0/0/1
- C. ipv6 route 2000::1/128 2012::1
- D. ipv6 route 2000::1/128 2012::2
- E. ipv6 route 2000::3/128 s0/0/0
Answer: A,C
NEW QUESTION # 178
......
200-301 Study Guide Realistic Verified Dumps: https://www.examtorrent.com/200-301-valid-vce-dumps.html
Accurate 200-301 Questions with Free and Fast Updates: https://drive.google.com/open?id=112rlH2qaMIZ1noN0VP7URz_S1pto7S8V
